CECS 369-2014 Specification for test of sliding micrometer《滑动测微测试规程》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A737 A737M-1999(2004) Standard Specification for Pressure Vessel Plates High-Strength Low-Alloy Steel.pdf

ASTM A737 A737M-2009 Standard Specification for Pressure Vessel Plates High-Strength Low-Alloy Steel《高强度低合金压力容器钢板用标准规范》.pdf

ASTM A737 A737M-2009(2013) Standard Specification for Pressure Vessel Plates High-Strength Low-Alloy Steel《高强度低合金压力容器钢板用标准规格》.pdf

ASTM A737 A737M-2017 Standard Specification for Pressure Vessel Plates High-Strength Low-Alloy Steel《高强度低合金钢压力容器板的标准规格》.pdf

ASTM A738 A738M-2005 Standard Specification for Pressure Vessel Plates Heat-Treated Carbon-Manganese-Silicon Steel for Moderate and Lower Temperature Service.pdf

ASTM A738 A738M-2007 Standard Specification for Pressure Vessel Plates Heat-Treated Carbon-Manganese-Silicon Steel for Moderate and Lower Temperature Service《中温和低温设备用经热处理的碳锰硅钢压力容器板.pdf

ASTM A738 A738M-2012 Standard Specification for Pressure Vessel Plates Heat-Treated Carbon-Manganese-Silicon Steel for Moderate and Lower Temperature Service《中温和低温设备用经热处理的碳锰硅钢压力容器板.pdf

ASTM A738 A738M-2012a Standard Specification for Pressure Vessel Plates Heat-Treated Carbon-Manganese-Silicon Steel for Moderate and Lower Temperature Service《中温和低温设备用经热处理的碳锰硅钢压力容器.pdf

ASTM A739-1990a(2006) Standard Specification for Steel Bars Alloy Hot-Wrought for Elevated Temperature or Pressure-Containing Parts or Both《高温或加压部件或高温加压部件用热轧合金钢棒标准规范》.pdf