1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationPD CEN ISO/TS 16403-2:2012Electronic fee collection Evaluation of equipment forconformity to ISO/TS 17575-4Part 2: Abstract test suite (ISO/TS16403-2:2012)Copyright European Comm
2、ittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN ISO/TS 16403-2:2012 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN ISO/TS16403-2:2012.The UK participa
3、tion in its preparation was entrusted to TechnicalCommittee EPL/278, Road transport informatics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsib
4、le for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 80835 7ICS 03.220.20; 35.240.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theS
5、tandards Policy and Strategy Committee on 31 October 2012.Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TECHNICAL SPECIFICA
6、TION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 16403-2 March 2012 ICS 35.240.60; 03.220.20 English Version Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 2: Abstract test suite (ISO 16403-2:2012) Perception du tlpage - valuation de confor
7、mit de lquipement lISO/TS 17575-4 - Partie 2: Suite dessai abstraite (ISO 16403-2:2012) Elektronische Gebhrenerhebung - Konformittsevaluierung von Einrichtungen nach CEN ISO/TS 17575-4 - Teil 2: Abstrakte Prfreihe (ISO 16403-2:2012) This Technical Specification (CEN/TS) was approved by CEN on 30 Jan
8、uary 2012 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are
9、required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible
10、 conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norw
11、ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in a
12、ny form and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TS 16403-2:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN ISO/TS 16403-2:201
13、2CEN ISO/TS 16403-2:2012 (E) 3 Foreword This document (CEN ISO/TS 16403-2:2012) has been prepared by Technical Committee CEN/TC 278 “Road transport and traffic telematics“, the secretariat of which is held by NEN, in collaboration with Technical Committee ISO/TC 204 “Intelligent transport systems“.
14、Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organization
15、s of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu
16、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN ISO/TS 16403-2:2012ISO/TS 1640
17、3-2:2012(E) ISO 2012 All rights reserved iiiContents Page Foreword iv Introduction . v 1 Scope 1 2 Normative references 1 3 Terms, definitions and abbreviated terms 1 3.1 Terms and definitions . 1 3.2 Abbreviated terms . 2 4 Abstract test method . 3 4.1 General . 3 4.2 Test architecture 3 4.3 Protoc
18、ol Implementation Extra Information for Testing 3 5 Untestable test purposes . 4 6 Abstract test suite data structures 4 6.1 ASN.1 description 4 6.2 Common data types 4 7 External functions . 4 7.1 General . 4 7.2 Functions for communications 4 8 Message filtering . 5 9 ATS naming conventions . 5 9.
19、1 General . 5 9.2 Definition naming conventions 5 9.3 Test case identifier 6 9.4 TTCN-3 modules identifier 7 Annex A (normative) TTCN-3 library modules for FE and BE 8 Annex B (informative) PIXIT Proforma for FE and BE . 9 Bibliography 11 Copyright European Committee for Standardization Provided by
20、IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN ISO/TS 16403-2:2012ISO/TS 16403-2:2012(E) iv ISO 2012 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standar
21、ds bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organi
22、zations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in
23、 the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 %
24、of the member bodies casting a vote. In other circumstances, particularly when there is an urgent market requirement for such documents, a technical committee may decide to publish other types of document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical ex
25、perts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote; an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for publication if it
26、is approved by 2/3 of the members of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confirmed, it is rev
27、iewed again after a further three years, at which time it must either be transformed into an International Standard or be withdrawn. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying
28、 any or all such patent rights. ISO/TS 16403-2 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems, in collaboration with Technical Committee CEN/TC 278, Road transport and traffic telematics. ISO/TS 16403 consists of the following parts, under the general title Electronic
29、fee collection Evaluation of equipment for conformity to ISO/TS 17575-4: Part 1: Test suite structure and test purposes Part 2: Abstract test suite Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without lic
30、ense from IHS-,-,-PD CEN ISO/TS 16403-2:2012ISO/TS 16403-2:2012(E) ISO 2012 All rights reserved vIntroduction This part of ISO/TS 16403 is part of a set of standards that supports interoperability of autonomous electronic fee collection (EFC) systems. These include ISO/TS 17575, which defines EFC sy
31、stems context data, their charge reports and their use of communication infrastructure. Within the suite of EFC standards, this conformance evaluation procedure defines the process and tests for conformity evaluation of Front End and Back End that comply with the requirements in ISO/TS 17575-4. ISO/
32、TS 16403 is intended to: assess Front End and Back End capabilities; assess Front End and Back End behaviour; serve as a guide for Front End and Back End conformance evaluation and type approval; achieve comparability between the results of the corresponding tests applied in different places at diff
33、erent times; facilitate communications between parties. ISO/TS 16403 is based on: ISO/TS 17575-4, Electronic fee collection Application interface definition for autonomous systems Part 4: Roaming; ISO/TS 17575-1, Electronic fee collection Application interface definition for autonomous systems Part
34、1: Charging; ISO/TS 17575-3, Electronic fee collection Application interface definition for autonomous systems Part 3: Context data. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,
35、-,-PD CEN ISO/TS 16403-2:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN ISO/TS 16403-2:2012TECHNICAL SPECIFICATION ISO/TS 16403-2:2012(E) ISO 2012 All rights reserved
36、 1Electronic fee collection Evaluation of equipment for conformity to ISO/TS 17575-4 Part 2: Abstract test suite 1 Scope The objective of this part of ISO/TS 16403 is to provide a basis for conformance tests for Front End and Back End in electronic fee collection, based on autonomous on-board equipm
37、ent. This supports interoperability between different equipment supplied by different manufacturers. The present abstract test suite (ATS) is directly derived from ISO/TS 16403-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For da
38、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/TS 16403-1:2012, Electronic fee collection Evaluation of equipment for conformity to ISO/TS 17575-4 Part 1: Test suite structure and test purp
39、oses ISO/TS 17575-1:2010, Electronic fee collection Application interface definition for autonomous systems Part 1: Charging ISO/TS 17575-2:2010, Electronic fee collection Application interface definition for autonomous systems Part 2: Communication and connection to the lower layers ISO/TS 17575-3,
40、 Electronic fee collection Application interface definition for autonomous systems Part 3: Context data ISO/TS 17575-4, Electronic fee collection Application interface definition for autonomous systems Part 4: Roaming 3 Terms, definitions and abbreviated terms 3.1 Terms and definitions For the purpo
41、ses of this document, the terms and definitions given in ISO/TS 16403-1 and the following apply. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PD CEN ISO/TS 16403-2:2012ISO/TS
42、16403-2:2012(E) 2 ISO 2012 All rights reserved3.1.1 Back End BE generic name for the computing and communication facilities of the Service Provider and/or the Toll Charger ISO/TS 17575-4:2011, definition 3.4 3.1.2 conformance testing testing the extent to which an IUT is a conforming implementation
43、ISO/IEC 9646-1:1994, definition 3.3.23 3.1.3 equipment access port eaPort port used to control the implementation under test 3.1.4 Front End FE part(s) of the toll system where usage data for an individual user are collected, processed and delivered to the Back End NOTE 1 The Front End comprises the
44、 on-board equipment and an optional proxy. NOTE 2 Adapted from ISO/TS 17575-4:2011. 3.1.5 IUT implementation under test an implementation of one or more OS1 protocols in an adjacent user/provider relationship, being that part of a real open system which is to be studied by testing ISO/IEC 9646-1:199
45、4, definition 3.3.43 3.1.6 system under test SUT the real open system in which the IUT resides ISO/IEC 9646-1:1994, definition 3.3.103 3.1.7 test case TC an abstract or executable test case ISO/IEC 9646-1:1994, definition 3.3.107 3.2 Abbreviated terms For the purposes of this document, the following
46、 abbreviated terms apply throughout the document unless otherwise specified. ADU Application data unit ASN.1 Abstract Syntax Notation One (see ISO/IEC 8824-1) Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted
47、without license from IHS-,-,-PD CEN ISO/TS 16403-2:2012ISO/TS 16403-2:2012(E) ISO 2012 All rights reserved 3ATM Abstract test method ATS Abstract test suite DUT Device under test EUT Equipment under test pco Point of control and observation PIXIT Protocol Implementation Extra Information for Testing
48、 SAP Service access point TP Test purpose 4 Abstract test method 4.1 General This clause describes the ATM used to test the layers at the FE side and at the BE side. 4.2 Test architecture The implementation under test is either the FE or the BE. The system under test comprises also the communication sub-layer, which is necessary to perform the IUT tests. The tester shall execute the TTCN-3 test cases as defined in Annex A of the present test specification, running on an emulated comm
