1、BSI Standards PublicationElectronic fee collection Secure monitoring forautonomous toll systemsPart 2: Trusted recorderPD CEN/TS 16702-2:2015National forewordThis Published Document is the UK implementation of CEN/TS 16702-2:2015.The UK participation in its preparation was entrusted to TechnicalComm
2、ittee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standa
3、rds Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 87284 6ICS 03.220.20; 35.240.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 30 Apri
4、l 2015.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN/TS 16702-2:2015TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16702-2 March 2015 ICS 03.220.20; 35.240.60 English Version Electronic fee collection - Secure monitoring for
5、autonomous toll systems - Part 2: Trusted recorder Perception du tlpage - Surveillance scurise pour systmes autonomes de page - Partie 2: Enregistreur fiabilis Elektronische Gebhrenerhebung - Sichere berwachung von autonomen Mautsystemen - Teil 2: Zuverlssige Datenaufzeichnung This Technical Specifi
6、cation (CEN/TS) was approved by CEN on 19 January 2015 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be convert
7、ed into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS
8、) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hunga
9、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENEL
10、EC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TS 16702-2:2015 EPD CEN/TS 16702-2:2015CEN/TS 16702-2:2015 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 7 2 Nor
11、mative references 7 3 Terms and definitions .8 4 Symbols and abbreviations . 11 5 SAM concept and scenarios 12 5.1 General . 12 5.2 The concepts of TR and Verification SAM . 13 5.3 Scenarios for a Trusted Recorder . 14 5.3.1 General . 14 5.3.2 Real-Time Freezing without using a Trusted Time Source 1
12、4 5.3.3 Real-Time Freezing using a Trusted Time Source 15 5.4 Scenarios for a Verification SAM 15 5.4.1 General . 15 5.4.2 MAC verification 16 5.5 General Scenarios 16 5.5.1 General . 16 5.5.2 Assigning a Toll Domain Counter . 17 5.5.3 Obtaining SAM Information . 17 6 Functional requirements 18 6.1
13、General . 18 6.1.1 SAM options 18 6.1.2 Presentation of requirements 19 6.2 Basic requirements. 19 6.3 Key management 20 6.4 Cryptographic functions 20 6.5 Real-time freezing . 21 6.6 Verification SAM . 21 6.7 Toll Domain Counter 22 6.8 Trusted time source . 23 6.9 Security protection level 24 7 Int
14、erface requirements . 24 7.1 General . 24 7.2 Calculate MAC for real-time freezing 24 7.2.1 General . 24 7.2.2 Calculation of MAC . 25 7.2.3 Coding of request . 25 7.2.4 Coding of response 26 7.3 Calculate digital signature for real-time freezing 26 7.3.1 General . 26 7.3.2 Calculation of digital si
15、gnature . 26 7.3.3 Coding of request . 27 7.3.4 Coding of response 27 PD CEN/TS 16702-2:2015CEN/TS 16702-2:2015 (E) 3 7.4 Get device information 28 7.4.1 General . 28 7.4.2 Coding of request 28 7.4.3 Coding of response . 28 7.5 Get toll domain counter information . 28 7.5.1 General . 28 7.5.2 Coding
16、 of request 29 7.5.3 Coding of response . 29 7.6 Get key information . 29 7.6.1 General . 29 7.6.2 Coding of request 30 7.6.3 Coding of response . 30 7.7 Error handling 31 Annex A (normative) Data type specification 32 A.1 General . 32 A.2 Data specifications 32 Annex B (normative) Implementation Co
17、nformance Statement (ICS) proforma 33 B.1 Guidance for completing the ICS proforma 33 B.1.1 Purposes and structure 33 B.1.2 Abbreviations and conventions . 33 B.1.3 Instructions for completing the ICS proforma 34 B.2 ICS proforma for Trusted Recorder . 35 B.2.1 Identification implementation 35 B.2.2
18、 Identification of the standard . 35 B.2.3 Global statement of conformance . 35 B.2.4 ICS proforma tables for TR . 36 B.3 ICS proforma for Verification SAM 39 B.3.1 Identification implementation 39 B.3.2 Identification of the standard . 39 B.3.3 Global statement of conformance . 39 B.3.4 ICS proform
19、a tables for Verification SAM . 40 Annex C (informative) Trusted time source implementation issues . 43 C.1 General . 43 C.2 Possible implementations of a TTS . 43 C.2.1 TTS based on a real time clock 43 C.2.2 TTS with the need for external calibration 43 C.3 TTS power supply 44 Annex D (informative
20、) Use of this Technical Specification for the EETS . 45 D.1 General . 45 D.2 Overall relationship between European standardization and the EETS 45 D.3 European standardization work supporting the EETS 45 D.4 Correspondence between this Technical Specification and the EETS . 46 Bibliography 47 PD CEN
21、/TS 16702-2:2015CEN/TS 16702-2:2015 (E) 4 Foreword This document (CEN/TS 16702-2:2015) has been prepared by Technical Committee CEN/TC 278 “Intelligent transport systems”, the secretariat of which is held by NEN. This part 2, the trusted recorder is the second part of the standard suite of the secur
22、e monitoring for autonomous toll systems. The overall concept of secure monitoring is defined in part one, CEN/TS 16702-1:2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for i
23、dentifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to a
24、nnounce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
25、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. PD CEN/TS 16702-2:2015CEN/TS 16702-2:2015 (E) 5 Introduction The widespread use of tolling requires provisions for users of vehicles that are roaming through many different toll domains. Users should be offered
26、a single contract for driving a vehicle through multiple toll domains and those vehicles require onboard equipment (OBE) that is interoperable with the toll systems in these toll domains. Thus, there is a commercial and economic justification both in respect of the OBE and the toll systems for enabl
27、ing interoperability. In Europe, for example, this need has been officially recognized and legislation on interoperability has been adopted (see directive 2004/52/EC) and the associated commission decision. The Technical Specification “Electronic fee collection Security framework” (CEN/TS 16439) pro
28、vides an overview of general security requirements of the stakeholders and provides a comprehensive threat analysis for the assets in an interoperable EFC scheme. A number of identified threats may result into less revenue of the Toll Charger, undercharging and/or not meeting required service levels
29、 between the Toll Service Provider and the Toll Charger. Some of these threats can be eliminated by implementing the security measures specified in CEN/TS 16439. However, most of the security measures necessary to combat the identified threats are to be addressed and specified in other standards. On
30、e example of threats that cannot be mitigated by security measures specified in CEN/TS 16439 concerns the trustworthiness of Toll Declarations in autonomous toll systems. Toll declarations are statements that a vehicle has been circulating in a particular toll domain within a particular time period.
31、 In autonomous toll systems, the circulation of vehicles is measured by Toll Service Providers, using GNSS-based OBE. Toll service providers then send Toll Declarations to the Toll Charger, based on which the Toll Charger will charge the Toll Service Provider. The correctness and completeness of the
32、se declarations is obviously of paramount interest to Toll Chargers, Toll Service Providers and users alike. The secure monitoring compliance checking concept provides a solution that allows a Toll Charger to check the trustworthiness of the Toll Declarations from a Toll Service Provider, while resp
33、ecting the privacy of the user. This concept is defined in two Technical Specifications. CEN/TS 16702-1:2014 “Secure monitoring for autonomous toll systems Part 1: Compliance checking” gives the full description of the secure monitoring compliance checking concept. The current Technical Specificatio
34、n, CEN/TS 16702-2 “Secure Monitoring for autonomous toll systems Part 2: Trusted recorder” defines the Trusted Recorder, a secure element required for some of the different types of secure monitoring compliance checking defined in CEN/TS 16702-1:2014. PD CEN/TS 16702-2:2015CEN/TS 16702-2:2015 (E) 6
35、Figure 1 Relation between EFC - Security framework and the overall secure monitoring concept Figure 1 shows the relations between the CEN/TS 16439 EFC Security Framework and EFC Secure monitoring for autonomous toll systems, i.e. the two parts Compliance Checking and Trusted Recorder. The threat ana
36、lysis in the Security Framework motivates the security requirements of an EFC system. The requirements are implemented and fulfilled by several security measures. One of these measures is Secure Monitoring, specified in “Secure Monitoring for autonomous toll systems Part 1: Compliance checking”. The
37、 “Secure Monitoring for autonomous toll systems Part 2: Trusted Recorder” specifies the cryptographic services necessary for the secure monitoring compliance checking concept. Figure 1 indicates also that a Trusted Recorder will most likely be implemented on trusted hardware, e.g. on Secure Applicat
38、ion Module (SAM), inside the OBE or on a general trusted platform of a vehicle. Such a trusted device could support more functions, which may be required for EFC or other services. PD CEN/TS 16702-2:2015CEN/TS 16702-2:2015 (E) 7 1 Scope This Technical Specification defines the requirements for the S
39、ecure Application Module (SAM) used in the secure monitoring compliance checking concept. It specifies two different configurations of a SAM: Trusted Recorder, for use inside an OBE; Verification SAM, for use in other EFC system entities. The Technical Specification describes terms and definitions u
40、sed to describe the two Secure Application Module configurations; operation of the two Secure Application Modules in the secure monitoring compliance checking concept; functional requirements for the two Secure Application Modules configurations, including a classification of different security leve
41、ls; the interface, by means of transactions, messages and data elements, between an OBE or Front End and the Trusted Recorder; requirements on basic security primitives and key management procedures to support Secure Monitoring using a Trusted Recorder. This Technical Specification is consistent wit
42、h the EFC architecture as defined in ISO 17573 and the derived suite of standards and Technical Specifications, especially CEN/TS 16702-1:2014 and CEN/TS 16439. The following is outside the scope of this Technical Specification: The life cycle of a Secure Application Module and the way in which this
43、 is managed. The interface commands needed to get a Secure Application Module in an operational state. The interface definition of the Verification SAM. Definition of a hardware platform for the implementation of a Secure Application Module. 2 Normative references The following documents, in whole o
44、r in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CEN/TS 16439:20131, Electronic fee collect
45、ion - Security framework CEN/TS 16702-1:2014, Electronic fee collection - Secure monitoring for autonomous toll systems - Part 1: Compliance checking EN ISO 14906:2011, Electronic fee collection - Application interface definition for dedicated short-range communication (ISO 14906:2011) 1)CEN/TS 1643
46、9:2013 is currently under revision and accepted as a CEN/ISO work item. The next edition will be assigned the reference CEN ISO/TS 19299. PD CEN/TS 16702-2:2015CEN/TS 16702-2:2015 (E) 8 ISO/IEC 7816-4:2013, Identification cards Integrated circuit cards Part 4: Organization, security and commands for
47、 interchange ISO/IEC 9797-1:2011, Information technology Security techniques Message Authentication Codes (MACs) Part 1: Mechanisms using a block cipher ISO/IEC 10118-3, Information technology Security techniques Hash-functions Part 3: Dedicated hash-functions ISO/IEC 14888-3:2006, Information techn
48、ology Security techniques Digital signatures with appendix Part 3: Discrete logarithm based mechanisms ISO/IEC 18031, Information technology Security techniques Random bit generation ISO/IEC 18033-3:2010, Information technology Security techniques Encryption algorithms Part 3: Block ciphers ISO/IEC
49、19790:2012, Information technology Security techniques Security requirements for cryptographic modules FIPS PUB 140-2, December 2002, Security requirements for cryptographic modules Common Criteria Protection Profile BSI-PP-0035, 2007, Security IC Platform Protection Profile, Version 1.0 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 authentication provision of assurance that a claimed characteristic of an entity is correct SOURCE: I
