1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substancesPD CEN/TS 17196:2018TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE
2、 SPEZIFIKATION CEN/TS 17196 July 2018 ICS 91.100.01 English Version Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances Produits de construction - Evaluation de lmission de substances dangereuses - Digestion p
3、ar leau rgale pour une analyse ultrieure de substances inorganiques Bauprodukte - Bewertung der Freisetzung von gefhrlichen Stoffen - Knigswasser-Aufschluss zur anschlieenden Analyse von anorganischen Stoffen This Technical Specification (CEN/TS) was approved by CEN on 9 March 2018 for provisional a
4、pplication. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the ex
5、istence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS i
6、nto an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nethe
7、rlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018
8、 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TS 17196:2018 ENational forewordThis Published Document is the UK implementation of CEN/TS 17196:2018.The UK participation in its preparation was entrusted to Technical Committee B/
9、557, Construction products - Assessment of dangerous substances.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application
10、. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 85057 8ICS 91.100.01Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the authority of the Standards Policy and Strategy Committe
11、e on 31 July 2018.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN/TS 17196:2018TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 17196 July 2018 ICS 91.100.01 English Version Construction products: Assessment of release of dangero
12、us substances - Digestion by aqua regia for subsequent analysis of inorganic substances Produits de construction - Evaluation de lmission de substances dangereuses - Digestion par leau rgale pour une analyse ultrieure de substances inorganiques Bauprodukte - Bewertung der Freisetzung von gefhrlichen
13、 Stoffen - Knigswasser-Aufschluss zur anschlieenden Analyse von anorganischen Stoffen This Technical Specification (CEN/TS) was approved by CEN on 9 March 2018 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN w
14、ill be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appro
15、priate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech R
16、epublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdo
17、m. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TS 1
18、7196:2018 EPD CEN/TS 17196:2018CEN/TS 17196:2018 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Symbols and abbreviations . 7 5 Principle . 8 6 Interferences and sources of errors . 8 7 Reagents . 8 8 Apparatus . 8 9 Procedur
19、e 10 9.1 Sample pre-treatment 10 9.2 Blank test 10 9.3 Method A: Thermal heating under reflux conditions 10 9.4 Method B: Microwave heating with temperature control at 170 C 180 C . 11 10 Precision data 12 11 Test report 13 Annex A (informative) Repeatability and reproducibility data for other matri
20、ces 14 A.1 General . 14 A.2 Interlaboratory studies 14 A.2.1 Background information in the interlaboratory study for EN 13657 . 14 A.2.2 Background information in the interlaboratory study for EN 16174 . 14 A.2.3 Interlaboratory comparison results . 15 Bibliography . 19 PD CEN/TS 17196:2018CEN/TS 17
21、196:2018 (E) 3 European foreword This document (CEN/TS 17196:2018) has been prepared by Technical Committee CEN/TC 351 “Construction Products: Assessment of release of dangerous substances”, the secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of t
22、his document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. A similar standard has been developed fo
23、r soil, sludge and biowaste, see Annex A. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, For
24、mer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. PD CEN/TS 17196:2018CEN/TS 17196
25、:2018 (E) 4 Introduction Following an extended evaluation of available methods for content analysis in construction products (CEN/TR 16045) it was concluded that multi matrix and multi-element digestion methods have preference over methods developed for single matrices or small groups of matrices. T
26、his implies that for inorganic substances aqua regia digestion is preferred for the digestion of construction products for content analysis. This document has been adopted from the work carried out in the context of CEN/TC 292 and CEN/TC 400 and is very similar to EN 13657 Characterization of waste
27、Digestion for subsequent determination of aqua regia soluble portion of elements 1 and EN 16174 Sludge, treated biowaste and soil Digestion of aqua regia soluble fractions of elements 2. This Technical Specification is part of a modular horizontal approach which was adopted in CEN/TC 351. Horizontal
28、 means that the methods can be used for a wide range of materials and products with certain properties. Modular means that a test standard developed in this approach concerns a specific step in assessing a property and not the whole chain of measurement (from sampling to analyses). Beneficial featur
29、es of this approach are that modules can be replaced by better ones without jeopardizing the standard chain and duplication of work of in different Technical Committees for Products can be avoided as far as possible. The modules that relate to the standards developed in CEN/TC 351 are specified in C
30、EN/TR 16220 3, which distinguishes between the modules. This Technical Specification belongs to the analytical step. The use of modular horizontal standards implies the drawing of test schemes as well. Before executing a test on a certain construction product to determine certain characteristics it
31、is necessary to draw up a protocol in which the adequate modules are selected and together form the basis for the entire test procedure. WARNING Persons using this Technical Specification should be familiar with usual laboratory practice. The reagents used in this Technical Specification are strongl
32、y corrosive and partly very toxic. Safety precautions are absolutely necessary, not only due to the strong corrosive reagents, but also to high temperature and high pressure. The use of laboratory-grade microwave equipment with isolated and corrosion resistant safety devices is required. Domestic (k
33、itchen) type microwave ovens should not be used, as corrosion by acid vapours may compromise the function of the safety devices and prevent the microwave magnetron from shutting off when the door is open, which could result in operator exposure to microwave energy. All procedures should be performed
34、 in a fume hood or in closed force-ventilated equipment. By the use of strong oxidising reagents, the formation of explosive organic intermediates is possible, especially when dealing with samples with a high organic content. Do not open pressurized vessels before they have cooled down. Avoid contac
35、t with the chemicals and the gaseous reaction products. IMPORTANT It is absolutely essential that tests conducted according to this Technical Specification be carried out by suitably trained staff. PD CEN/TS 17196:2018CEN/TS 17196:2018 (E) 5 1 Scope This Technical Specification specifies methods for
36、 obtaining the aqua regia digestible content of construction products. Solutions produced by this method are for analysis by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled spectrometry (ICP-OES) for the following 67 elements: Aluminium (Al), antimony (Sb), arsenic (As)
37、, barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), cesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridi
38、um (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rubidium (Rb), rhenium (Re), rhodium (Rh), rutheniu
39、m (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulphur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn),
40、 and zirconium (Zr). Solutions produced by the methods are suitable for analysis by cold vapour atomic absorption or fluorescent spectrometry (CV-AAS, CV-AFS), for mercury (Hg). The method in this Technical Specification is applicable to construction products. Digestion with aqua regia will not nece
41、ssarily accomplish total decomposition of the sample. The extracted analyte concentrations may not necessarily reflect the total content in the sample. NOTE Construction products include e.g. mineral-based products (S); bituminous products (B); metals (M); wood-based products (W); plastics and rubbe
42、rs (P); sealants and adhesives (A); paints and coatings (C), see also CEN/TR 16045. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited appli
43、es. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15936, Sludge, treated biowaste, soil and waste Determination of total organic carbon (TOC) by dry combustion EN 17087:1, Construction products: Assessment of release of dangerous substan
44、ces Preparation of test portions from the laboratory sample for testing of release and analysis of content EN ISO 3696:1995, Water for analytical laboratory use Specification and test methods (ISO 3696:1987) 3 Terms and definitions For the purposes of this document, the following terms and definitio
45、ns apply NOTE The terms and definitions, where relevant, were taken from EN 16687:2015. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ 1Under preparation. Stage at the time of publication
46、: prEN 17087:2017. PD CEN/TS 17196:2018CEN/TS 17196:2018 (E) 6 ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 analyte determinand element, ion or substance to be determined by an analytical method SOURCE: EN 16687:2015, 4.1.11 3.2 aqua regia digestion solution obtained by mixin
47、g one volume of concentrated nitric acid and three volumes of concentrated hydrochloric acid 3.3 digestion mineralization of the organic matter of a sample and dissolution of its mineral part (as completely as possible) when reacted with a reagent mixture Note 1 to entry: Usually done with a strong,
48、 concentrated acid like aqua regia or nitric acid to dissolve inorganic substances for chemical analysis. SOURCE: CEN/TR 16045:2010, 2.2.2 3.4 digestion vessel flask where the test portion and the acid solution are mixed together and the digestion is carried out 3.5 digest solution resulting from ac
49、id digestion of a sample SOURCE: CEN/TR 16045:2010, 2.2.1 3.6 dry matter mass fraction of a sample excluding water expressed as mass fraction calculated by determination of dry residue or water content SOURCE: EN 15934:2012, 3.3 3.7 microwave unit microwave digestion system (oven and associated equipment) 3.8 sample portion of material selected from a larger quantity of material Note 1 to entry: The manner of selection of the sample should be prescribed in a sampling plan. Note 2 to entry: The term “sample” is often ac
