1、STD=CEPT ETS 300 328-ENGL 1994 2326434 OOL487L 339 EUROPEAN CONFERENCE OF POSTAL AND TELECOMMUNICATIONS ADMINISTRATIONS Application form for testing to ETS 300 328 Radio Equipment and Systems (RES) Wideband data transmission systems Technical characteristics and test conditions for data transmission
2、 equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques The submission documentation to a National Regulatov Body for Type approval purposes shall consist of two parts; Part one. Application form Part two. Test report form Version : 02/94 Adopted by ERC WG RR :Ma
3、y 1994 Published by: CEPT Liaison Office P.O. Box CH-3001 BERNE Telephone: +41313382501 Facsimile: c41313382078 Telex : 911089 CEPT CH STD.CEPT ETS 300 328-ENGL 1994 232b4L4 0014872 O75 nrn aro H raye I 01 14 APPLICATION FORM TO TEST LABORATORY FOR TESTING TO ETS 300 328 The Application Form shall b
4、e used for equipment submitted to testing in accordance with ETC 300 328 intended for wideband data systems using spread spectrum modulation techniques. The application form shall be completed by the applicant and submitted to a test laboratory accredited in accordance with EN45001 or IS0 guide 25 o
5、r a national standard conforming to EN45001 or IS0 guide 25. PLERSE READ THE FOLLOWING NOTES Note (a) Mimbar of items for twe testing More than one item of equipment may be required to be submitted for type testing where an equipment needs to be modified to provide connections to facilitate testing,
6、 i.e. measurements requiring direct connections to be made, for example audio measurements. In such cases a second un-modified equipment may be required for radiated measurements i.e. case or cabinet radiation or ERP (effective radiated power) measurements to be performed. Full details of modificati
7、ons are to be provided. When a family of products is submitted for type approval, each product of the family that has different operational features (e.g. different output power) shall carry a unique type designation. Nota ib) Accessories it is the applicants responsibility when submitting equipment
8、(s) to the test laboratory to provide appropriate connectors to facilitate the connection of test equipment by the test laboratory to the equipment under test (E.U.T.). This should enable: 1) access to the equipment RF power output (transmitter); 2) means of connecting the equipment to an external p
9、ower supply. It is the applicants responsibility to provide host equipment and/or test jig(s) as applicable. See ETS 300 328, clause 6.5 and see “Other items supplied“ in this document. Note (c) Pre-production models For type approval to be granted on the basis of tests conducted on a pre- productio
10、n model, that model must be manufactured to the same production drawings and manufacturers specification as the later production models. Where this is not the case, the national regulatory authority reserves the right to require either partial or full type testing to be carried out on the final prod
11、uction equipment. Note (d) ADD licants reswnsibilities it is the applicants responsibility to ensure that the equipment meets all the regulatory requirements for marking in the country where he is seeking type approval. Note (e) ADP licants declaration The applicant shall declare (see ETS 300 328 Cl
12、ause 4.1) the following specific characteristics of the equipment: The aggregate bit rate (see sub-clause 3.1 for the definition); The type of modulation used: frequency hopping spread spectrum modulation (FHSS), direct sequence spread spectrum (DSSS) modulation or another type of spread spectrum mo
13、dulation; The duty cycle of the transmitter and the typical ON and OFF periods (Tx on and Tx off). Where frequency hopping spread spectrum modulation is used: the number of hopping channels, the dwell time per channel, the maximum time between two instances of use of the same channel and the frequen
14、cy separation between the highest and lowest hop frequencies. The operating frequency range(s) of the equipment; The type of the equipment, stand-alone combined unit or plug-in card; The extreme operating conditions that apply to the equipment offered for testing; The gain of the antenna(s) assembly
15、(ies) intended for normal use, i.e. the transfer function between the conducted RF power and e.i.r.p. Where the equipment to be tested can be equipped with one or more antennas, the applicant shall declare and provide for testing the antenna(s) with the equipment; all of these antennas are subject t
16、o type approval together with the equipment. Further, the applicant shall provide a (draft) user manual of the equipment submitted . STD-CEPT ETS 300 328-ENGL 1994 2326434 00111874 948 nan aao n raye 3 WI 14 APPLICANTS DETAILS MANUFACTURER 0 0 CATEGORY OF APPLICANT (Piease tick ree- (a) vant box opp
17、osite) (b) 0 IMPORTER If box (b), (c) or (d) is ticked respect to the manufacturer. DISTRIBUTOR complete details in box below with (Cl (d) 0 AGENT COMPANY NAME ADDRESS . . NAME FOR CONTACT PURPOSES . TELEPHONE NO: . FAX NO: . TELEX NO: . WANUFACTRERS DETAILS COMPANY NAME . ADDRESS NAME FOR CONTACT P
18、URPOSES TELEPHONE NO: FAX NO: TELEX NO: STD*CEPT ETS 300 328-ENGL 1994 W 232b4L4 0014875 884 W nrn aro n raye 4 VI ir+ TYPE DESIGNATION (2 ) The type designation may be either a single alphanumeric code an alphanumeric code divided into two parts. Please fill in EITHER : OR : TYPE DESIGNATION IN “WO
19、 PARTS : 1. EQUIPMENT SERIES N0.(3) ( “MODEL NUMBER“ ) IIIIIIIIIIIIIIIIIIIII AND 2. EQUIPMENT SPECIFIC NO. (4) (“IDENTIFICATION NO“) liiiiiiiliiiiiiiiiiiil (2) This is the manufacturers numeric or alphanumeric code or name that is specific to a particular equipment. It may contain information in cod
20、ed form on the characteristics of the equipment e.g. frequency, power. The manufacturer is free to choose the form of the type designation. (3) This is the number, code or trade name used by the manufacturer to describe a series or family of equipment of substantially the same mechanical and electri
21、cal construction which will include a number of related equipments. This number is often referred to as the “model no.“. (4) This is the manufacturers identification number given to a specific equipment in the series or family, of equipments. It is often referred to as the “identification numberM. T
22、YPE OF EQUIPMENT (5) (Equipment with or without its own control provisions) Combined EauiDment (Equipment where the radio part is fully 0 0 plua-in systems) integrated within another type of equipment (Equipment intended for a variety of host Other . . 0 (5) Equipment belongs to one of the following
23、 (and only to one). Separate application forms are required for each variant. 1 I TYPE OF ANTEWNA 0 yes temporary RF connector provided: antenna connector 0 Number of antenna assembly(ies) submitted . gain of the antenna assembly(ies) intended for normal use: dBi for assembly identified as b) over t
24、he extremes of the termerature ranae(s) of the intended host - - equipment(s) in case of plug-in-radio devices (see ETC 300 328 clause 6.4.1). STD-CEPT ETS 300 328-ENGL 3994 M 232b434 0034884 897 nrn ar0 n raye ia 01 14 OTHER ITWS SUPPLIED Yes 0 0 Spare batter i es (e-g. for portable equipment) No 0
25、 Yes Battery charging device Special tools for dismantling equipment Yes No Yes (see ETC 300 328, clauses 6.4 and 6.5) 0 o U Host Systems 0 1 host provided 3 hosts provided 0 Please give details on each host . . . No host systems provided o Test jig or interface box (if applicable) Yes No 0 El 0 Yes
26、 U User Manual o 0 0 0 0 0 RF test fixture No Yes (9) No Yes No Yes No Technical documentation (Handbook and circuit diagrams ) Others If Yes, please specify ,. . specified (must be supplied separately 0 Test data sequence (9) The ETS indicates information to be provided in the User Manual. The User
27、 Manual shall be provided with the application form. STD-CEPT ETS 300 328-ENGL 3994 2326434 0014885 723 D nLn ao n raye I+WI 14 DECLARATIONS 0 Yes o No Are the equipments submitted representative production models? If not are the equipments pre-production models? If pre-production equipments are sub
28、mitted will the final production equipments be identical in respects with the equipment tested If no supply full details o Yes o No Is the equipment submitted marked in accordance with CEPT Rec. T/R 10-01 ? 0 Yes o No I hereby declare tat I am entitled to sign on behalf of the applicant and that the
29、 information supplied is correct and complete. Signature . Name position held . Date ETS 300 328 Radio Equipment and Systems (RES); Wideband transmission systems; Technical characteristics and test conditions for data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques E- DNK IF J imp1 I Remarks I Yes I I y- I YeS Planned YeS Yes 1.1 1.1994. Type Approval Planned I Yes I YeS Planned YeS YeS 2.9.1 997.Regulation on technical requirements for radio stations, art. 5 (Off.Gaz. of SVN. No 50/97. throunh RC/DFCX%317
