CGA C-6 2-2009 Guidelines for visual inspection and requalification of fiber reinforced high pressure cylinders《纤维加固高压汽缸的目视检验和再鉴定用指南》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2157-2009(2018) Standard Specification for Synthetic Surfaced Running Tracks.pdf

ASTM F2158-2001 Standard Specification for Residential Central-Vacuum Tube and Fittings《住宅中央真空管及配件的标准规范》.pdf

ASTM F2158-2008 Standard Specification for Residential Central-Vacuum Tube and Fittings《住宅中央真空管及配件的标准规范》.pdf

ASTM F2158-2008(2013) Standard Specification for Residential Central-Vacuum Tube and Fittings《住宅中央真空管及配件的标准规范》.pdf

ASTM F2158-2008(2016) Standard Specification for Residential Central-Vacuum Tube and Fittings《住宅中央真空管和配件的标准规格》.pdf

ASTM F2159-2005 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing《SDR9交联聚乙烯(PEX)管用利用铜挤压环的塑料插入管件的标准规范》.pdf

ASTM F2159-2009 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing.pdf

ASTM F2159-2010 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Tem.pdf

ASTM F2159-2011 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Tem.pdf