CGA G-4 11-2011 Reciprocating compressors for oxygen service.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 60601-2-68-2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for usep.pdf

BS EN 60601-2-8-1998 Medical electrical equipment - Particular requirements for safety - Specification for therapeutic X-ray equipment operating in the range 10 kV to 1 MV《医用电气设备 安.pdf

BS EN 60601-2-8-2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV.pdf

BS EN 60601-2-9-1997 Medical electrical equipment Particular requirements for safety Specification for patient contact dosemeters used in radiotherapy with electrically connected r.pdf

BS EN 60603-1-2000 Connectors for frequencies below 3 MHz for use with printed boards - Generic specification - General requirements and guide for the preparation of detail specifi.pdf

BS EN 60603-10-1998 Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards for basic grid of 2 54 mm (0 1 in) inverted type《印制电.pdf

BS EN 60603-12-1998 Connectors for frequencies below 3 MHz for use with printed boards - Detail specification for dimensions general requirements and tests for a range of sockets d.pdf

BS EN 60603-13-1998 Connectors for frequencies below 3 MHz for use with printed boards - Detail specification for two-part connectors of assessed quality for printed boards for bas .pdf

BS EN 60603-14-1999 Connectors for frequencies below 3 MHz for use with printed boards - Detail specification for circular connectors for low-frequency audio and video applications印.pdf