1、CAN/CGSB-3.18-2010Supersedes CAN/CGSB-3.18-2000Diesel Fuel for Locomotive-Type Medium-Speed Diesel EnginesICS 75.160.20National Standard of CanadaCopyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license fr
2、om IHS-,-,-The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this National Standard of Canada has been developed is a government agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas throug
3、h the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research an
4、d testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canad
5、a conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private se
6、ctors. Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy Manual for the Development and Review of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. Suggest
7、ions for their improvement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issue
8、s and amendments, and ordering instructions, is found in the CGSB Catalogue, which is published annually and is available without charge upon request. More information is available about CGSB products and services at our Web site www.ongc-cgsb.gc.ca. Although the intended primary application of this
9、 standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could
10、be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requ
11、irements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights.
12、CGSB shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights are entirely their own responsibility. Further information on CGSB and its services and standards may be obtaine
13、d from: The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The STANDARDS COUNCIL OF CANADA is the coordinating body of the National Standards System, a coalition of independent, autonomous organizations working towards the further development and improvement of
14、voluntary standardization in the national interest. The principal objects of the SCC are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic
15、 and international trade, and furthering international cooperation in the field of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval do
16、es not refer to the technical content of the standard; this remains the continuing responsibility of the SDO. A NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, produc
17、ers, regulators, users (including consumers), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard, which is capable of making a significant and timely contribution to the national interest. Those who have a need to apply standards are encourage
18、d to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO, which publishes the standard. The responsibility for approving standards as National Standards of Canada rests with the: Standards Council of Canada 200-270 Albert St
19、reet Ottawa, Ontario K1P 6N7 How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongcpwgsc.gc.ca on the Web www.ong
20、c-cgsb.gc.ca Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NATIONAL STANDARD OF CANADA CAN/CGSB-3.18-2010Supersedes CAN/CGSB-3.18-2000DIESEL FUEL FOR LOCOMOTIVE-TYPE MEDIUM-SPEED DI
21、ESEL ENGINESCETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONSFRANAISE ET ANGLAISE.NATIONAL STANDARD OF CANADA CAN/CGSB-3.14-2006Prepared by the Approved by the Canadian General Standards Board Standards Council of CanadaPublished September 2010 by the Canadian General Standards Board Gatine
22、au, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented by the Minister of Public Works and Government Services, the Minister responsible for the Canadian General Standards Board, (2010). No part of this publication may be reproduced in any form without the prior permission of th
23、e publisher.Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CANADIAN GENERAL STANDARDS BOARDCOMMITTEE ON MIDDLE DISTILLATE FUELS(Voting membership at date of approval)ChairDickout, S.
24、 National Defence (User)General Interest CategoryDunn, T.R. ConsultantJaaskelainen, H. ConsultantJacula, T. Maxxam Analytics Inc.King, L.J. Transport CanadaLee, S.W. Natural Resources CanadaPickard, A.L. ConsultantSquires, B. Oti Canada GroupTharby, R.D. Tharby Technology, ConsultantsTremblay, A. Ol
25、eotek Inc.Turingia, M. Amtek Engineering Services Ltd.Vidian-Jones, C. Certispec Services Inc.Webster, G. Advanced Engine Technology Ltd.Wispinski, D. Alberta Research CouncilYuen, W. Saskatchewan Research CouncilProducer CategoryCampbell, S. Canadian Bioenergy Corp.Cash, R.B. Archer Daniels Midland
26、 Co.Cosentino, J. Afton Chemical Corp.Hiscock, R. North AtlanticJobin, J.L. Ultramar Ltd.Kenney, B. Petro-CanadaKenreck, G. GE Water and Process TechnologiesLund, C. Imperial Oil Ltd.MacMillan, D. Suncor Energy Products Inc.Malynowsky, E. Innospec Fuel SpecialtiesMitchell, K. Shell Canada ProductsMo
27、zdzen, E. Lubrizol Canada Ltd.Norton, K. Biox Corp.Paszti, M. Rothsay RecyclesPayne, J.P. Infineum Canada Ltd.Porter, S. Canadian Renewable Fuels AssociationRobichaud, S. Irving Oil Ltd.Ward, L. Husky Oil Ltd.Winters, P. Baker PetroliteRegulator CategoryArchambault, R. Government of QuebecRensing, M
28、.J. Government of British ColumbiaUser CategoryBryksaw, G. General Motors of Canada Ltd.Khan, S. Ministry of Transportation, OntarioLaskowski, S. Canadian Trucking AllianceMcKinstry, R. The Railway Association of CanadaReny, G. Public Works and Government Services CanadaStumborg, M. Agriculture and
29、Agri-Food CanadaWhite, D. Government of NunavutYip, Y.M. Canadian Coast GuardSecretary (non-voting)Barcellos, P. Canadian General Standards BoardAcknowledgment is made for the translation of this National Standard of Canada by the Translation Bureau of Public Works and Government Services Canada.CAN
30、/CGSB-3.18-2010Copyright Canadian General Standards Board Provided by IHS under license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB-3.18-2010 1CAN/CGSB-3.18-2010Supersedes CAN/CGSB-3.18-2000CANADIAN GENERAL STANDARDS BOARDDIESEL FUEL FOR LOCOM
31、OTIVE-TYPE MEDIUM-SPEED DIESEL ENGINES1. SCOPE1.1 This standard applies to one type of diesel fuel that is suitable for use in locomotive-type medium-speed diesel engines.1.2 This type of fuel may be suitable for use1in other medium-speed diesel applications.1.3 The testing and evaluation of a produ
32、ct against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appr
33、opriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use.2. REFERENCED PUBLICATIONS2.1 The following publications are referenced in this standard:2.1.1 Canadian General Standards Board (CGSB)CAN/CGSB-3.0 Methods of Testing Petroleum and Associat
34、ed Products:No. 16.0 Sulphur in Diesel Fuel and Similar Middle Distillates by Energy Dispersive X-Ray Fluorescence Spectrometry (EDXRF)No. 20.9 CGSB Cetane Index of Diesel FuelsNo. 28.8 Visual Haze Rating of Distillate Fuel OilsNo. 140.1 Low Temperature Flow Test (LTFT) for Diesel FuelsCAN/CGSB-3.2
35、Heating Fuel Oil.2.1.2 Environment CanadaSulphur in Diesel Fuel Regulations.2.1.3 ASTM International Annual Book of ASTM Standards (Appendix A).2.1.4 Weather Data Analysis Pack.2.2 See Appendix B for regulations that apply to diesel fuels.1Fuel suitable for on-road diesel-powered equipment is covere
36、d by CAN/CGSB-3.517, Automotive (On-Road) Diesel Fuel, and CAN/CGSB-3.520, Automotive Low-Sulphur Diesel Fuel Containing Low Levels of Biodiesel Esters (B1-B5), and for off-road applications, by CAN/CGSB-3.6, Off-road Diesel Fuel.Copyright Canadian General Standards Board Provided by IHS under licen
37、se with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2 CAN/CGSB-3.18-20102.3 A dated reference in this standard is to the issue specified. An undated reference in this standard is to the latest issue, unless otherwise specified by the authority applying this
38、 standard. The sources are given in the Notes section.3. DEFINITIONSThe following definitions apply in this standard:3.1 2.5 Percentile Low-End Design Temperature The 2.5 percentile design value is the temperature for which 2.5% of the hourly outside air temperatures for an indicated half month are
39、observed to occur at or below this value. (The 2.5% Low-End Design Temperature for most weather stations in Canada by half month period may be derived from the Weather Data Analysis Pack.2)3.2 Diesel Fuel A middle distillate fuel composed of hydrocarbons and naturally occurring, petroleum-derived, n
40、on-hydrocarbons that boils in the range of 150 and 400C and that is intended for use as a fuel in compression-ignition engines.3.3 Medium-Speed Diesel Engine An internal combustion engine of the compression-ignition type that generates full power at speeds between approximately 400 and 1200 r/min.3.
41、4 Representative Fuel A sample of fuel with inspection properties that are typical of the fuel as supplied.4. GENERAL REQUIREMENTS4.1 The fuels specified shall be hydrocarbons that may contain additives designed to improve their properties or performance, for example, diesel ignition quality, low-te
42、mperature flow properties and static charge dissipation (Appendix C3).4.2 The fuel shall be a stable homogeneous liquid free from foreign matter likely to clog filters or nozzles or to damage equipment.4.3 The fuel shall not contain used lubricating oils or fluids.4.4 See Appendix B for regulations
43、that apply to diesel fuels.5. DETAILED REQUIREMENTSFor an explanation of the significance of tests and the test methods used in this standard, see Appendix C.5.1 Low-Temperature Flow Properties5.1.1 Low-temperature flow properties of the fuel shall be designed (par. 7.1.1 a) to give satisfactory per
44、formance at the temperatures indicated by the 2.5% low-end design temperature data for the period and location of intended use. However, when the 2.5% low-end design temperature is colder than -48C, a fuel meeting a -48C operability limit may be provided. See Appendix C, section C8 for further infor
45、mation.5.1.2 The following shall be reported:a. The 2.5% low-end temperature to which the fuel is designed.b. The test method used to determine the operability temperature:i. Cloud point (ASTM D2500 or D57734); orii. Low-temperature flow test (LTFT) for diesel fuels (CAN/CGSB-3.0 No. 140.1); c. The
46、test method result.2The Weather Data Analysis Pack was developed by Petro-Canada for the Canadian Petroleum Industry.3Appendix C is not a mandatory part of this standard.4In the event of a dispute, ASTM D2500 shall be the referee method.Copyright Canadian General Standards Board Provided by IHS unde
47、r license with CGSBNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-CAN/CGSB-3.18-2010 35.2 The diesel fuel shall comply with the specified limiting values. The specified limiting values shall not be changed. This precludes any allowances for the test method precisi
48、on and adding or subtracting digits.5.3 For purposes of determining conformance with the specified limiting values, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specified limiting value, in accordance with the
49、rounding-off method of ASTM E29. There is one exception (par. 5.16).5.3.1 Where test values differ between two parties, a resolution shall be in accordance with ASTM D3244 in order to determine conformance with the specified limiting values, with the criticality of the limits set at p = 0.5.5.4 Test methods other than those referenced in this standard may be used only if they have
