1、 CISPR/TR 16-2-5Edition 1.0 2008-07TECHNICAL REPORT Specification for radio disturbance and immunity measuring apparatus and methods Part 2-5: In situ measurements of disturbing emissions produced by physically large equipment CISPR/TR16-2-5:2008(E)INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFEREN
2、CE THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permissio
3、n in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for fur
4、ther information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electro
5、nic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The
6、IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Publis
7、hed details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in a
8、dditional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: cscie
9、c.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 CISPR/TR 16-2-5Edition 1.0 2008-07TECHNICAL REPORT Specification for radio disturbance and immunity measuring apparatus and methods Part 2-5: In situ measurements of disturbing emissions produced by physically large equipment INTERNATIONAL ELECTROTEC
10、HNICAL COMMISSION PICS 33.100.10 PRICE CODEISBN 2-8318-9894-3INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE Registered trademark of the International Electrotechnical Commission 2 TR CISPR 16-2-5 IEC:2008(E) CONTENTS FOREWORD.3 1 Scope.5 2 Normative references .5 3 Terms and definitions .6 4
11、Methodology.7 4.1 Structure of each measurement.7 4.2 Preliminary measurements and selection of measurement method 8 4.3 Selection of the EUT mode of operation and the reference point depending on the environment8 4.4 Assessment of measurement results .9 5 Method of in situ measurement of conducted
12、disturbance.9 5.1 General .9 5.2 Conducted emission measurement procedure .10 5.2.1 Connection conditions .10 5.2.2 Reference ground for in situ measurements.10 5.2.3 Disturbance voltage/current measurements on cables which carry wanted symmetrical signals .10 5.2.4 Disturbance voltage measurements
13、on cables which do not carry wanted symmetrical signals .11 6 Method of in situ measurement of radiated disturbance 11 6.1 General .11 6.2 Measurement conditions12 6.3 Measurement methods 12 6.3.1 Measurement parameters 12 6.3.2 Measurements in case of interference complaints12 6.3.3 Measurements fo
14、r compliance purposes 13 6.3.4 Measurements below 30 MHz13 7 Measurement report .13 Bibliography15 Figure 1 Enclosure port8 TR CISPR 16-2-5 IEC:2008(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE _ SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY
15、 MEASURING APPARATUS AND METHODS Part 2-5: In situ measurements of disturbing emissions produced by physically large equipment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nati
16、onal Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publi
17、cly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governm
18、ental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on
19、technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted
20、by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international u
21、niformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
22、 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its direc
23、tors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising
24、 out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is dra
25、wn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committe
26、e may propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an International Standard, for example “state of the art“. CISPR 16-2-5, which is a technical report, has been prepared by CISPR subcommittee H: Limits for the
27、protection of radio services. 4 TR CISPR 16-2-5 IEC:2008(E) The text of this standard is based on the following documents: Enquiry draft Report on voting CISPR/H/161/DTR CISPR/H/172/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in
28、 the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the CISPR 16 series, published under the general title Specification for radio disturbance and immunity measuring apparatus and methods, can be found on the IEC website. The
29、committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a
30、 revised edition, or amended. A bilingual version of this publication may be issued at a later date. TR CISPR 16-2-5 IEC:2008(E) 5 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS Part 2-5: In situ measurements of disturbing emissions produced by physically large equi
31、pment 1 Scope This part of CISPR 16 deals with in situ electromagnetic disturbance measurements in any environment from physically large equipment and systems excluding networks. It covers both radiated and conducted emission phenomena, and does not deal with immunity tests. This technical report is
32、 intended to be applied primarily to such physically large equipment which are not under the scope of any existing emission standards (as for example CISPR 11 and CISPR 22). It serves only as a guideline on how to deal with emissions of that equipment at the particular location of installation. It d
33、oes not establish any emission requirements. NOTE 1 Although this technical report is intended to be applied to equipment which is not under the scope of any existing emission standards, it may be used also in such cases in order to serve as additional information for carrying out in situ measuremen
34、ts for any type of large equipment. NOTE 2 Examples of large equipment are: production machines, conveyors, large displays, aircraft simulators, traffic control equipment, etc. Due to the severe impact of the conditions existing at a particular location of operation and the use of the respective lar
35、ge equipment, however, it is not intended to use the measurements in the frame of type testing. NOTE 3 In general, type testing on large equipment is only possible at standardized test sites in a controlled environment. The assessment results obtained under in situ conditions are only valid for the
36、respective individual large equipment actually measured at its particular place of installation. These results cannot be transposed to other equipment of the same type, but installed at other locations. Reference in-situ measurement distances will be given. This allows comparison of the measurement
37、results with limits from existing relevant standards. The frequency range under consideration is from 9 kHz to 18 GHz. Dealing with biological effects on living matter is excluded from this document. 2 Normative references The following referenced documents are indispensable for the application of t
38、his document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CISPR 16-1-1, Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and
39、 immunity measuring apparatus Measuring apparatus CISPR 16-1-2, Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus Ancillary equipment Conducted disturbances 6 TR CISPR 16-2-5 IEC:2008(E) CISPR 16-1-4, Specifi
40、cation for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus Ancillary equipment Radiated disturbances CISPR 16-2-1, Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measure
41、ment of disturbances and immunity Conducted disturbance measurements CISPR 16-2-3, Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of disturbances and immunity Radiated disturbance measurements NOTE See also the Bibliography 3 Terms a
42、nd definitions For the purposes of this document, the terms and definitions contained in IEC 60050-161 as well as the following terms and definitions apply. NOTE See particularly electromagnetic disturbance (IEV 161-01-05) and electromagnetic interference (IEV 161-01-06). 3.1 boundary for physically
43、 large equipment: imaginary straight line periphery describing a simple geometric configuration encompassing the equipment or system under consideration. All interconnecting cables inside the physically large equipment should be included within this boundary 3.2 antenna reference point the reference
44、 point referred to in the antenna calibration procedure, which is used to determine the measurement distance between the equipment under test and the antenna 3.3 characterised interference interference with an origin from an identified electromagnetic phenomenon, and for which the disturbance level
45、at a given point is characterised by a collection of technical data, for example the spectrum 3.4 deviation from intended use regarding EMC installation and/or operation of a device, equipment or system, deviating from the instructions of the manufacturer given in the users manual NOTE The installat
46、ion refers to both the defined environment and electrical conditions including cabling. 3.5 distribution point point on a data and communication network inside a system or an installation, electrically nearest to a particular communication equipment or terminal, at which other equipment or terminals
47、 are, or could be, connected 3.6 in-plant point of coupling IPC point on a network inside a system or an installation, electrically nearest to a particular load, at which other loads are, or could be, connected NOTE The IPC is usually the point for which electromagnetic compatibility is to be consid
48、ered. IEC 61000-2-4, definition 3.1.7 TR CISPR 16-2-5 IEC:2008(E) 7 3.7 point of common coupling PCC point on a public power supply network, electrically nearest to a particular load, at which other loads are, or could be, connected IEC 61000-2-4, definition 3.1.6 3.8 reference point (for in situ me
49、asurement) point at which in situ measurement is performed NOTE 1 In case of radiated measurements, it is measured along a perpendicular line from the boundary to the antenna reference point. NOTE 2 Different reference points might be defined according to the frequency range. NOTE 3 The boundary to be taken into account for measurement depends on the actual in situ conditions 3.9 physically large equipment a group of items of equipment functionally connected to form a commerci
