1、PUBLISHED DOCUMENT Classification of grades of steel - Examples of classification related to European Standards PD CR 10313:ZOOO CR 10313:2000 ICs 77.080.20 1 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW COPYRIGHT European Committee for StandardizationLicensed by Informatio
2、n Handling ServicesSTD-BSI PD CR L0313-ENGL 2000 LbZIbb9 0848006 672 1111 PD CR 10313:2000 been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 April 2000 Amd. No. O BSI 04-2000 ISBN O 580 3463
3、2 3 National foreword Date Comments This Published Document reproduces verbatim CR 103132000. The UK participation in its preparation was entrusted to Technical Committee ISE5, Technical delivery conditions, classification and desigantion of steels, which has the responsibility to: - aid enquirers t
4、o understand the text; - present to the responsible internatiofluropean committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; - monitor related international and European developments and promulgate them in the UK. A list of organizations represe
5、nted on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Intemational Standards Correspondence
6、 Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itse
7、lf confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the CR title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. COPYRIGHT
8、 European Committee for StandardizationLicensed by Information Handling ServicesSTD-BSI PD CR L0313-ENGL 2000 m Lb24bb7 0848007 509 m Page 1 CEN REPORT CR 10313 PD CR 10313:2000 RAPPORT CEN CEN BERICHT January 2000 ICs English version Classification of grades of steel - Examples of classification re
9、lated to European standards Classification des nuances dacier - Exemples de classification lie aux normes europennes Einteilung der Sthle - Beispiele fr die Einteilung in Europischen Normen This CEN Report was approved by CEN on 1 October 1999. It has been drawn up by the Technical Committee ECISSTC
10、 6. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMI
11、TEE FUR NORMUNG COMITE EUROPEEN DE NORMALISATION Central Secretariat: rue de Stassart, 36 8-1050 Brussels O 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CR 10313:2000 E COPYRIGHT European Committee for StandardizationLicensed
12、by Information Handling ServicesSTD.BSI PD CR 111313-ENGL 2000 I 1b24bb7 0848008 445 Page 2 PD CR 10313:2000 Foreword This document has been prepared as a technical report in order to replace the annexes A and B of the European standard EN 10020 : 1988. This document has been prepared by ECISS KC 6,
13、 “Definition and classification of steel“. COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesSTD.BSI PD CR L0313-ENGL 2000 m Lb24bb9 0848009 38L Page 3 PD CR 10313:ZOOO 1 Scope The present CEN report establishes a classification between alloy and non alloy stee
14、ls which are indicated in the existing European Standards as function of the quality classes defined in prEN 10020. 2 Normatives references 1) prEN 10020- , Definition and classification of grades of steel EN 1 O01 6-2 : 1994, Non alloy steel rod for drawing andor cold rolling - Part 2 : Specific re
15、quirements for general purposes rod EN 1 O01 6-3 : 1994, Non alloy steel rod for drawing andor cold rolling - Part 3 : Specific requirements for rimmed and rimmed substitute low carbon steel rod EN 1 O01 6-4 : 1994, Non alloy steel rod for drawing andor cold rolling - Part 4 : Specific requirements
16、for rod for special applications EN 10025 : 1990 + Al : 1993, Hot rolled products of non-alloy structural steels - Technical delivery conditions EN 10028-2 : 1992, Flat products made of steels for pressure purposes - Part 2 : Non-alloy and alloy steels with specified elevated temperature properties
17、EN 10028-3 : 1992, Flat products made of steels for pressure purposes - Part 3 : Weldable fine grain steels, normalized EN 10028-4 : 1994, Flat products made of steels for pressure purposes - Part 4 : Nickel alloy steels with specified low temperature properties EN 10028-5 : 1996, Flat products made
18、 of steels for pressure purposes - Part 5 : Weldable fine grain steels, thermomechanically rolled EN 10028-6 : 1996, Flat products made of steels for pressure purposes - Part 6 : Weldable fine grain steels, quenched and tempered EN 10028-7 : 1999, flat products made of steels for pressure purposes -
19、 Part 7 : Stainless steels ENV 10080 : 1995, Steel for the reinforcement of concrete weldable ribbed reinforcing steel 6 500 - Technical delivery conditions for bars, coils and weldable fabric EN 10083-1 : 1996, Quenched and tempered steels - Part I : Technical delivery conditions for special steels
20、 EN 10083-2 : 1996, Quenched and tempered steels - Part 2 : Technical delivery conditions for unalloyed quality steels EN 10083-3 : 1995, Quenched and tempered steels - Part 3 : Technical delivery conditions for boron steels EN 10084 : 1998, Case hardening steels - Technical delivery conditions EN 1
21、0087 : 1998, Free-cuffing steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods EN 10088-1 : 1995, Stainless steels - Part 1 : List of stainless steels 1) To be published - COPYRIGHT European Committee for StandardizationLicensed by Information Handling Services
22、S1D.BSI PD CR L03L3-ENGL 2000 E L624b69 OB4BOLO OT3 Page 4 PD CR 10313:2000 EN 10088-2 :1995, Stainless steels - Part 2 : Technical delivery conditions for sheevplate and strip for general purposes EN 10088-3 : 1995, Stainless steels - Part 3 : Technical delivery conditions for semi-finished product
23、s, bars, rods and sections for general purposes EN 1 O090 : 1998, Valve steels and alloys for internal combustion engines EN 1 O1 06 : 1 995, Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state EN 1 O1 07 : 1 995, Grain-oriented electrical steel sheet and
24、 strip delivered in the fully processed state EN 1 O1 1 1 : 1998, Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions EN 1 O1 13-2 : 1993, Hot-rolled products in weldable fine grain structural steels - Part 2 : Delivery conditions for normalized/
25、normalized rolled steels EN 101 13-3 : 1993, Hot-rolled products in weldable fine grain structural steels - Part 3 : Delivery conditions for thermomechanical rolled steels EN 1 O120 : 1996, Steel sheet and strip for welded gas cylinders EN 1 O1 26 : 1995, Cold rolled electrical non-alloyed steel she
26、et and strip delivered in the semi-processed state EN 10130 : 1991+A1 : 1998, Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions EN 10137-2 : 1995, Plates and wide flats made of high yield strength steels in the quenched and tempered or precipitation hardened
27、 conditions - Part 2 : Delivery conditions for quenched and tempered steels EN 10137-3 : 1995, Plates and wide flats made of high yield strength steels in the quenched and tempered or precipitation hardened conditions - Part 3 : Delivery conditions for precipitation hardened steels EN 1 O1 39 : 1997
28、, Cold rolled narrow steel strip - Technical delivery conditions EN 10142 : 1995, Continuously hot-dip zinc coated low carbon steel strip and sheet for cold forming- Technical delivery conditions EN 1 O1 47 : 1995, Continuously hot-dip zinc coated structural steel sheet and strip - Technical deliver
29、y conditions EN 1 O1 49-2 : 1995, Hot-rolled flat products made of high yield strength steels for cold forming - Part 2 : Delivery conditions for thermomechanically rolled steels EN 1 O1 49-3 : 1995, Hot-rolled flat products made of high yield strength steels for cold forming - Part 3 : delivery con
30、ditions for normalized or normalized rolled steels EN 1 O1 52 : 1 993, Electrolytically zinc coated cold rolled steel flat products - Technical delivery conditions EN 1 O1 54 : 1996, Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions EN 1 O1 55 :
31、 1993, Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions EN 1 O1 65 : 1995, Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state EN 10202 : 1989, Cold reduced electrolytic chromiudchromium oxide coated steel EN 1020
32、3 : 1 991, Cold reduced electrolytic tinplate EN 10205 : 1989, Cold reduced blackplate in coil for the production of tinplate or electrolytic chromiudchromium oxide coated steel COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesSTD.BSI PD CR 10313-ENGL 2000 162
33、4669 08480LL T3T Page 6 PD CR 10313:2000 EN 1 0207 : 1 991 +Al : 1 997, Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars EN 10208-1 : 1997, Steel pipes for combustible fluids - Technical delivery conditions - Part 7 : Pipes of requirement class A EN 10
34、208-2 : 1996, Steel pipes for combustible fluids - Technical delivery conditions - Part 7 : Pipes of requirement class B EN 10209 : 1996, Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions EN 1021 0-1 : 1994, Hot finished structural hollow sections of
35、non-alloy and fine grain structural steels - Part 7 : technical delivery requirements EN 1021 3-2 : 1995, Technical delivery conditions for steel castings for pressure purposes - Part 2 : Steel grades for use at room temperature and elevated temperatures EN 1021 3-3 : 1995, Technical delivery condit
36、ions for steel castings for pressure purposes - Part 3 : Steel grades for uses at low temperatures EN 1021 3-4 : 1995, Technical delivery conditions for steel castings for pressure purposes - Part 4 : Austenitic and austenitic-ferritic steel grades EN 10214 : 1995, Continuously hot-dip zinc-aluminiu
37、m (a) coated steel strip and sheet - Technical delivery conditions EN 10215 : 1995, Continuously hot-dip aluminium-zinc (U) coated steel strip and sheet - Technical delivery conditions EN 1021 9-1 : 1997, Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 7 : Tec
38、hnical delivery requirements EN 1 0222-2 : 1 999, Steels forgings for pressure purposes - Part 2 : Ferritic and martensitic steels with specified elevated temperature properties EN 10222-3 : 1998, Steels forgings for pressure purposes - Part 3 : Nickel steels with specified low temperature propertie
39、s EN 10222-4 : 1998, Steels forgings for pressure purposes - Part 4 : Weldable fine grain steels with high proof strength EN 10222-5 : 1999, Steels forgings for pressure purposes - Part 5 : Martensitic, austenitic, and austenitic-ferritic stainless steels EN 10248-1 : 1995, Hot rolled sheet piling o
40、f non alloy steels - Part 7 : Technical delivery conditions EN 10249-1 : 1995, Cold formed sheet piling of non alloy steels - Part 7 : Technical delivery conditions EN 10265 : 1995, Magnetic materials - Specification for steel sheet and strip with specified mechanical propetties and magnetic permeab
41、ility EN 1 0267 : 1 998, Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures EN 10268 : 1998, Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - general delivery conditions EN 10271 : 1998, Electrolytically zinc-nickel (ZN) c
42、oated steel flat products - Technical delivery conditions EN 10273 : 1999, Hot rolled weldable steels bars for pressure purposes with specified elevated temperature properties EN 10283 : 1 998, Corrosion resistant steel castings COPYRIGHT European Committee for StandardizationLicensed by Information
43、 Handling ServicesPage 6 PD CR 10313:2000 3 D 0 aa C 5 .- a i 2 - 2 - u J I 1 7 7 z W z W z W m COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesSTD-BSI PD CR L03L3-ENGL 2000 Lb24bb 0848033 802 E Page 7 313:2000 - , R 1 I I C C P : : i 1 c a a j z 5 C C L L 1
44、i 1 I jj 1 i r I 1 i I .! c 1 I l l I a i i C C I c c C I z f L c , T i . 4 : c C P C L 1 i C I C U C I t i c 6 Q m 7 l- N z W r COPYRIGHT European Committee for StandardizationLicensed by Information Handling ServicesSTD-BSI PD CR L0313-ENGL 2000 U Lb24669 0848014 749 111 Page 8 PD CR 10313:2000 P
45、n L COPYRIGHT European Committee for StandardizationLicensed by Information Handling Services _ STD-BSI PD CR 10313-ENGL 2000 I 1624bb9 0848015 be5 I PD CR 103 13:ZOOO CR 10313:ZOOO BSI 389 Chiswick High Road London w4 4AL BSI - British Standards Institution BSI is the independent national body resp
46、onsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards shouid nuke sure that they possess the latest amen
47、dments or editions. it is the constant aim of BSI to improve the quaiity of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be f
48、ound on the inside front cover. Tel O20 8996 9OOO. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards rders for all BSI, international and foreign standards publicat
49、ions should be addressed to Customer Services. Tel 020 8996 9001. Fax: 020 8996 7001. in response to orders for intemational standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. nformation on standards BSI provides a wide range of information on national, European and intemational standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also adable which give details on ali its products and services. Contact the
