1、B140.10-06(reaffirmed 2015)Oil-fired warm-air heating appliances for mobile housing and recreational vehiclesLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This proc
2、ess brings together volunteers representing varied viewpoints and interests to achieve co nsensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standard
3、s.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, wi thout limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its mer chantab
4、ility, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statu
5、te, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIA TED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPE
6、CIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT , TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY , ARISING OUT OF OR RESUL TING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOC
7、UMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any perso
8、n or entity to another person or entity . The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilit y whatsoever arising in any way from any and all use of or reliance on the information contain
9、ed in this document. CSA is a private not-for-profit company that publishes voluntar y standards and related documents. CSA has no power , nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs bet
10、ween CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner of all works cont ained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this docu
11、ment, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA s intellectual property and may give rise to a right in CSA to seek legal redres
12、s for such use, modification, copying, or disclosure. CSA rese rves all intellectual property rights in this document.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:
13、If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have suc h
14、 copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this docume
15、nt.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately . Use of this document constitutes your acceptance
16、 of the terms and conditions of this Legal Notice.CSA Standards Update ServiceB140.10-06March 2006Title:Oil-fired warm-air heating appliances for mobile housing and recreational vehiclesPagination:55 pages (ix preliminary and 46 text), each dated March 2006To register for e-mail notification about a
17、ny updates to this publicationgo to www.shop.CSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2018535.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit
18、 CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Blank pagePublished in March 2006 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-7
19、47-4044Visit our Online Store at www.ShopCSA.caB140.10-06Oil-fired warm-air heating appliances for mobilehousingand recreational vehiclesCSA StandardISBN 1-55436-100-1Technical Editor:Senka Krsikapa Canadian Standards Association 2006All rights reserved. No part of this publication may be reproduced
20、 in any form whatsoever without the prior permission of the publisher.March 2006 iiiContents Canadian Standards AssociationOil-fired warm-air heating appliancesformobilehousingandrecreational vehiclesTechnical Committee on Oil-Burning Appliance Standards viPreface viiiForeword ix1Scope12 Reference p
21、ublications and definitions 12.1 Reference publications 12.2 Definitions 23 General requirements 33.1 General 33.2 Oil burner 33.3 Electrical features 43.4 Methods of assembly and shipment 44 Construction requirements 44.1 General 44.2 Combustion system 44.3 Accessibility of parts 54.4 Location of f
22、uel lines and fuel components 64.5 Casings and liners 64.6 Air filters 74.7 Lubrication 74.8 Openings into combustion chamber and flue passages 84.9 Vent system 84.10 Vent collars 84.11 Heating surfaces 94.12 Combustion chambers 94.12.1 Refractory material 94.12.2 Metal combustion chambers 104.12.3
23、Simulated life test 104.12.4 Simulated endurance test 104.13 Flue and flame baffles 104.14 Insulating materials 104.15 Safety controls 114.16 Combustion air and dilution air intakes 124.17 Means of ignition 134.18 Valves 134.19 Integral fuel tanks 134.20 Fuel lines and fittings 144.21 Fuel oil filte
24、r 154.22 Provision for mounting 154.23 Flow rate, vaporizing-type burners 154.24 Oil containment 154.25 Roof-jacks, flue-gas vents, and connectors 155Marking175.1 General 17B140.10-06 Canadian Standards Associationiv March 20065.2 Details required 175.3 Cautions 196 Instructions 196.1 General 196.2
25、Installation and service manual 196.3 Operating instructions and homeowner instructions 216.4 Additional homeowner instructions 227 Normal tests 227.1 General 227.1.10 Test enclosure 237.2 Combustion 247.2.1 Test requirements 247.2.2 Test procedures 247.3 Rated output capacity 257.3.1 Test requireme
26、nts 257.3.2 Test procedures 267.3.3 Determination of rated output capacity 277.4 Temperature safety limit control performance 277.4.1 Test requirements 277.4.2 Test procedures 287.5 Continuity of operation 287.5.1 Test requirements 287.5.2 Test procedures 287.6 Operating temperatures 297.6.1 Test re
27、quirements 297.6.2 Test procedures 307.7 Motor rating, air-circulating blowers, and fans 317.7.1 Test requirements 317.7.2 Test procedures 317.8 Air filters 327.9 Cyclic temperature test 327.9.1 Test requirements 327.9.2 Test procedure 327.10 Gas passageway leakage test 337.10.1 Heat exchanger leaka
28、ge test 337.10.2 Carbon dioxide reading 347.11 Oil containment test 347.12 Rigidity 347.12.1 Integral tanks 347.12.2 Constant-level valves 347.13 Rain test 348Abnormal tests348.1 General 348.2 Abnormal temperatures 358.3 Simulated wind test 368.3.1 Test requirements 368.3.2 Test procedure 368.4 Abno
29、rmal voltage 378.5 Flooding 378.6 Flooded pot burn-off 378.7 Power failure 38 Canadian Standards AssociationOil-fired warm-air heating appliancesformobilehousingandrecreational vehiclesMarch 2006 v9 Burner tests 389.1 Vaporizing-type burners 389.2 Atomizing-type burners 38AnnexesA(informative) Calcu
30、lation of air-free sample 44B(informative) Marking translations 45Tables1 Maximum torque for screws 382 Thickness of plain carbon steel for various sizes of appliances 393 Thickness of heat exchangers comply ing with the cyclic temperature test 394 Minimum thickness for integral tanks 395 Minimum al
31、lowable static pressures in duct systems 39Figures1 Test enclosure 402 Test duct design details for forced-air units 413 Details of thermocouple placement in outlet duct 424 Wind direction 43B140.10-06 Canadian Standards Associationvi March 2006Technical Committee on Oil-Burning Appliance StandardsM
32、.F.C. Brooker Bradford White Canada Inc.,Mississauga, Ontario ChairJ. Godfree Jeremy Godfree Product Design, Pugwash, Nova ScotiaVice-ChairC. Baumgartner Natural Resources Canada, Ottawa, OntarioT. Begoske Field Controls, Brighton, Michigan, USA AssociateK. Blair ECR International Inc.,Utica, New Yo
33、rk, USAB. Blouin UTC Canada Corporation,Sherbrooke, QubecH. Bouchard Corporation des matres mcaniciens en tuyauterie du Qubec, Montral, QubecAssociateM. Bouchard Riello Burners North America, Orford, QubecR.L.D. Cane Caneta Research, Mississauga, Ontario AssociateE. Grzesik Ontario Ministry of Energ
34、y,Toronto, OntarioA.C.S. Hayden Advanced Combustion Technologies, Ottawa, Ontario A. Herzon Nordyne Inc.,OFallon, Missouri, USAAssociateK. Johnson Newmac Manufacturing Incorporated, Debert, Nova ScotiaE. Mason Halifax, Nova ScotiaConsumer RepresentativeI.W. Mault Manitoba Department of Labour and Im
35、migration,Winnipeg, ManitobaR. McCullough Office of the Fire Commissioner, Regina, Saskatchewan Canadian Standards AssociationOil-fired warm-air heating appliancesformobilehousingandrecreational vehiclesMarch 2006 viiP.G. McKay Brampton, Ontario Consumer RepresentativeW.G. Mitchell Ottawa, Ontario R
36、. Mossavi Viessmann Manufacturing Company Inc., Waterloo, Ontario M.F. Rego Bradford White Canada Inc., Mississauga, Ontario AssociateP. Rizcallah National Research Council Canada, Ottawa, Ontario AssociateR.W. Smith RS Consulting, Whitby, Ontario D.C. Stewart Nova Scotia Department of Environment a
37、nd Labour,Halifax, Nova ScotiaR. Sumabat Technical Standards and Safety Authority, Toronto, Ontario S. Krsikapa CSA,Mississauga, OntarioProject ManagerB140.10-06 Canadian Standards Associationviii March 2006PrefaceThis is the second edition of CSA B140.10, Oil-fired warm-air heating appliances for m
38、obile housing and recreational vehicles. It supersedes the previous edition published in 1974. It is one of a series of oil-burning equipment Standards covering minimum requirements for the safe operation, acceptable performance, design, construction, manufacture, marking, and testing of oil-burning
39、 equipment and should be read in conjunction with CSA B140.0, Oil-Burning Equipment: General Requirements.Changes to this new edition include the following:(a) The referenced Standards and definitions have been updated.(b) The Scope of the Standard has been clarified.(c) References to external “flue
40、s” and “flue pipes” have been changed to “vents” and “vent pipes”.(d) Filter specifications have been updated.(e) Requirements for the installation, service, and operating instructions have been updated and now indicate some homeowner instructions. Some marking requirements have been modified.(f) Ma
41、ximum vent outlet temperature requirements have been updated.(g) All numeric values have been converted to SI (metric) units, with yard/pound (imperial) or US Customary units shown for information only. This Standard was prepared by the Technical Committee on Oil-Burning Appliance Standards, under t
42、he jurisdiction of the Strategic Steering Committee on Fire Safety and Fuel Burning Equipment, and has been formally approved by the Technical Committee. It will be submitted to the Standards Council of Canada for approval as a National Standard of Canada. March 2006Notes: (1) Use of the singular do
43、es not exclude the plural (and vice versa) when the sense allows.(2) Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose.(3) Th
44、is publication was developed by consensus, which is defined by CSA Policy governing standardization Code of good practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, but not necessarily unanimity”. It is consistent with this definition that a me
45、mber may be included in the Technical Committee list and yet not be in full agreement with all clauses of this publication.(4) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee.(5) All enquiries regarding this Standard,
46、including requests for interpretation, should be addressed to Canadian Standards Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6. Requests for interpretation should(a) define the problem, making reference to the specific clause, and, where appropriate, include an illu
47、strative sketch;(b) provide an explanation of circumstances surrounding the actual field condition; and(c) be phrased where possible to permit a specific “yes” or “no” answer.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and ar
48、e published in CSAs periodical Info Update, which is available on the CSA Web site at www.csa.ca. Canadian Standards AssociationOil-fired warm-air heating appliancesformobilehousingandrecreational vehiclesMarch 2006 ixForewordThe Canadian Standards Association (CSA) develops standards under the name
49、 Canadian Standards Association, and provides certification and testing under the name CSA International. CSA International provides certification services for manufacturers who, under license from CSA, wish to use the appropriate registered CSA Marks on certain products of their manufacture to indicate conformity with CSA Standards.CSA Certification for a number of products is provided in the interest of maintaining agreed-upon standards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable, certific
