1、C22.2 No. 101-M1984(reaffirmed 2013)Electrically heated bedding appliances for household useLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This proce
2、ss brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of stan
3、dards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchant
4、ability, or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any ap
5、plicable statute, rule, or regulation. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT
6、 NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR
7、 USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perfor
8、m any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or rel
9、iance on the information contained in this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intell
10、ectual property rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the
11、contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate
12、laws that protect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this
13、 document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the v
14、alidity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sL
15、OADTHISDOCUMENTONTOACOMPUTERFORTHESOLEPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ it consisted of 57 pages, each dated December 1984. Amendments in the form of replacement pages were issued in january 1987 and February 1 990 (see General Instruction Nos. 2 and 3)*
16、 *ff you do not have General Instruction Nos. 2 and 3, please contact CSA, Standards Sales. Amendments to Clauses 3.2, 4.5.2.2, 6.1 .1, and 6.28.1 and the deletion of Clause 6.21 and Figure 9 have been formally approved and are incorporated (and identified by a vertical line in the margin) in the at
17、tached replacement pages. CSA Standard C22.2 No. 101-M1984 now consists of the following pages: 312, 1720, 2326, 2934, 3740, 4954, and 57 dated December 1984; 45-48 dated January 1987; 15, 16, 35, and 36 dated February 1990; and 13, 14, 21, 22, 27, 28, 4144, 55, and 56 dated March 1993. These replac
18、ement pages are to be inserted into your copy of the Standard; the pages replaced should be kept for reference. 3. General Requirements 3.2. General requirements applicable to this Standard are given in CSA Standard C22.2 No. 0, General RequirementsCanadian Electrical Code, Part II. 3.2 Reference Pu
19、blications 3.2.2. Where reference is made to CSA Standards of the Canadian Electrical Code, Parts I and II, such reference shall be considered to refer to the latest edition and revision thereto, unless otherwise specified. This Standard refers to the following such Standards and the year dates show
20、n indicate the latest editions available at the time of printing: C22 .1-1982, Canadian Electrical Code, Part I; C22.2 No. 0-M1982, General RequirementsCanadian Electrical Code, Part II; C22.2 No. 0.3-1976, Test Methods for Electrical Wires and Cables; C22.2 No. 0.6-M1982, Flammability Testing of Po
21、lymeric Materials; C22.2 No. 0.ll-M1985, Classification of Polymeric Compounds; C22.2 No. 8-M1982, Electromagnetic Interference (EMI) Filters; C22.2 No. 42-M1984, General Use Receptacles, Attachment Plugs, and Similar Wiring Devices. 3.2.2 Where reference is made to the following Publications, such
22、reference shall be considered to refer to that edition listed below: CSA Standard CAN3-C235-83, Preferred Voltage Levels for AC Systems, 0 to 50 000 V; Standards 1J648-82, Deflection Temperature of Plastics Under Flexural Load; D1230-83, Flammability of Apparel Textiles. C22.2 No. 101-M1984 - March
23、1993 - Page 13 (Replaces p. 13, December 1984) CGSBt Standard CAN2-86.1-M79, Care Labelling of Textiles. *pjrj Society for Testing and Materials tCanadian General Standards Board. C22.2 No. lOl-M1984 - March 1993 - Page 14 (Replaces p. 14, December 1984) 4.5.2 Enclosures 4.5.2.1 Enclosures of metal
24、shall be of suitable size and shape and have adequate thickness of material. They shall be formed and assembled so that they (a) have the strength and rigidity necessary to resist the abuses to which they may be subjected, without increasing the fire or accident hazard due to deformation of the encl
25、osure resulting in reduction of spacings, loosening or displacement of parts, etc; and (b) afford protection against accidental contact with bare live parts. 4.5.2.2 Nonmetallic enclosures for electrical components shall (a) have a minimum wall thickness of 1.5 mm; (b) have limiting temperatures not
26、 less than the maximum temperatures to which they may be exposed during normal operation; and (c) comply with Test F (0.6 V-2) of CSA Standard C22.2 No. 0.6, except that the material may have a flammability classification of 0.6KB as determined by Test E of CSA Standard C22.2 No. 0.6, provided all o
27、f the following conditions are met: (i) all enclosure parts, including ribs, grills, and the like, are spaced not less than 12.7 mm from bare live parts; (ii) the material resists ignition f or a period not less than 7 s when tested in accordance with Test I (hot-wire ignition) of CSA Standard C22.2
28、 No. 0.6; and (iii) the material resists ignition when subjected to 60 arcs of the high current arc ignition test of CSA Standard C22.2 No. 0.11. 4.5.3 Openings in Enclosures 4.5.3.1 Openings in external enclosures shall not be located directly below terminals, heater assembly, wires, and other live
29、 parts, unless suitably baffled to prevent molten metal and flaming particles from falling through to the supporting surface. 4.5.3.2 Openings in external enclosures shall be constructed, located, or baffled to prevent a probe as shown in Figure 1 from being inserted to touch live parts, bare or ins
30、ulated. 4.5.4 Protection Against Rusting and Corrosion 4.5.4.1 Iron and steel parts shall be suitably protected against rusting and corrosion as required by CSA Standard C22.2 No. 0. C22.2 No. lOl-M1984 - March 1993 - Page 21 (Replaces p. 21, December 1984) 4.5.4.2 The surfaces of metal parts shall
31、be protected, if necessary, against scaling, flaking, or other effects of corrosive action that might cause subsequent reduction in the dielectric strength of controls. 4.5.5 Mechanical Assembly 4.5.5.1 Parts used in the construction of controls shall have adequate strength and shall be assembled an
32、d secured in position to ensure proper functioning under both normal and abnormal conditions that may be met in service. 4.5.5.2 Switches, lampholders, and thermostats shallbe fastened securely and rigidly so as to ensure that the required spacings are maintained. Such components, held by a single s
33、crew and lockwasher (eg, stem-mounted controls) shall be prevented from turning by a key or equivalent if movement may result in a hazardous condition. 4.5.5.3 A stop provided on a temperature adjustment of a control unit shall be durable and reliable if it is relied upon to prevent unsafe temperatu
34、res. It shall not be in the form of a projection on the body or control arm that is liable to breakage and it shall not be dependent on the design of a knob or lever that is removable. 4.5.5.4 All splices and connections shall be mechanically secure and shall provide adequate and reliable electrical
35、 contact. Except for printed circuit boards and hollow pin terminals into which the wire is inserted, soldered connections shall be made mechanically secure before being soldered if breaking or loosening of the connections might result in any hazardous condition. Splices shall be provided with insul
36、ation equivalent to that of the wires involved if the required spacing between splices and other metal parts is not assured. Note: In the case of hollow-pin terminals, mechanical security may be achieved by bending the stripped end of a solid or a solder-dipped stranded conductor back on itself to f
37、orm a “V“1 pushing it into a hollow pin that has a constriction at the open end so that the free end of the wire engages the constriction, and then soldering in place with a silver solder. 4.5.6 Electrical Insulation 4.5.6.1 Bare live parts shall be supported on heat resisting, moisture- absorption
38、resisting insulating material that is suitable for the particular application and that withstands the most severe conditions likely to be encountered in service. C22.2 No. lOl-M1984 - March 1993 - Page 22 (Replaces p. 22, December 1984) (g) IF IMPROPER OPERATION OF THIS BEDDING IS OBSERVED, DISCONTI
39、NUE ITS USE IMMEDIATELY AND CONSULT THE MANUFACTURER OR THE DEALER REGARDING ITS REPAIR and SI UN MAUVAIS FONCTIONNEMENT DE CET ARTICLE DE LITERIE EST REMAR.QUE, CESSER SON EMPLOI IMMEDIATEMENT ET CONSULTER LE FABRICANT 013 LE DISTRIBUTEUR EN VtJE DE SA REPARATION; (h) NOT FOR HOTEL, MOTEL OR OTHER
40、INSTITUTIONAL USE and NE PAS UTILISER DANS UN HOTEL, MOTEL, 013 AUTRE INSTITUTION. 5.8 A complete set of instructions explaining the care, use, and laundering of bedding appliances shall be furnished with the appliances. As an alternative the CARE symbols covered in CGSB Standard CAN2-86.l shall be
41、used. Details covering the proper use of the snap fasteners shall be included (see Clause 4.3.1.7). C22.2 No. lOl-M1984 - March 1993 - Page 27 (Replaces p. 27, December 1984) 6. Tests 6.1 Teats Required and Order of Tests 6.1.1 Except as otherwise noted, 1 representative sample of the bedding applia
42、nce, thermostats equal to the number in the bedding (except that 6 only are required if the temperature settings of the thermostats are the same), and 1 control unit shall be subjected to the tests outlined in the clauses listed below in the order given: (a) Bedding (or Bedding Appliance as Required
43、): Item Test Clause 1 Rating 2 Normal Temperature 3 Flexing (Bedding) 4 Laundering 5 Current Leakage 6 Dielectric Strength 7 Normal Temperature 8 Pullout 9 Abnormal Temperature 10 Flexing (Bedding Connector) (b) Bedding Shell: Item Test 11 Flammability 12 Shrinkage 13 Flaxrnability (c) Control Unit:
44、 I tern 14 15 16 17 18 19 20 21 22 23 Test Calibration Temperature Overload Endurance Calibration (Repeated) Leakage Current Dielectric Strength Strain Relief Short Circuit Flame Clause 6.13 6.14 6.15 6.16 6.13 6 .17 6.18 6.19 6.20 4.5.2.2 (c) C22.2 No. 101-M1984 - March 1993 - Page 28 (Replaces p.
45、28, December 1984) 6.2 6.3 6.4 6.7 6.8 6.9 6.5 6.6 6.10 6.11 Clause 6.12 6.39 6 .12 (d) Bedding Thermostats: Item Test Clause 24 Calibration 6.22 25 Overload 6.23 the current-carrying parts of the control unit shall rupture. Ignition of the cheesecloth or emission of flame or molten metal from the c
46、ontrol unit shall not occur. 6.21Deleted C22.2 No. lO1-M1984 - March 1993 - Page 41 (Replaces p. 41, December 1984) 6.22 Calibration (Bedding Thermostats) 6.22.1 The cut-off temperature of thermostats, as received, shall not vary more than 5C from the design temperature value. 6.22.2 The cut-off tem
47、perature of thermostats shall be determined by any suitable method, such as a calibrating oven, whereby the temperature can be closely regulated and accurately measured. 6.23 Overload (Bedding Thermostats) Thermostats shall be subjected to lOOcycles of operation at a rate not exceeding 10 cycles/mm,
48、 making and breaking 15O of the current corresponding to the input of Clause 6.3.4 at C22.2 No. 101-M1984 - March 1993 - Page 42 (Replaces p. 42, December 1984) 125 V. The supply shall be a 125 V circuit connected to a suitable noninductive load. There shall be no electrical or mechanical failure, n
49、or any undue burning, pitting, or welding of the contacts. 6.24 Endurance (Bedding Thermostats) 6.24.1 Thermostats shall be subjected to 30 000 cycles of operation at a rate not exceeding 30 cycles/mm. 6.24.2 Thermostats shall be tested at 125 V and the inputdetermined in Clause 6.3.4, except that if they are tested in the bedding, the voltage may be that necessary to obtain the input of Clause 6.3.4.
