1、REVISED JANUARY 2016C22.2 No. 131-14Type TECK 90 cableLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers represen
2、ting varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liab
3、ilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of an
4、y third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.
5、IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIA
6、L DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROU
7、P HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity
8、 to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in t
9、his document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs be
10、tween CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade s
11、ecrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or other
12、s intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn
13、 to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is enti
14、rely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the
15、 sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each
16、such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and
17、conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.
18、Revision HistoryC22.2 No. 131-14, Type TECK 90 cableUpdate No. 1 January 2016 Revision symbol (in margin)Clause 2Tables 3, 17, and 18Standards Update ServiceC22.2 No. 131-14March 2014Title: Type TECK 90 cableTo register for e-mail notification about any updates to this publication go to shop.csa.ca
19、click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2422147.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect your personal
20、 information.ISBN 978-1-77139-050-7 2014 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.Published in March 2014 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard, Toronto,
21、 Ontario, Canada M9W 1R3 To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Type TECK 90 cableC22.2 No. 131-14C22.2 No. 131-14Type TECK 9
22、0 cableMarch 2014 2014 CSA Group 1ContentsTechnical Committee on Wiring Products 3Subcommittee on Metal-Clad Cables 5Preface 71 Scope 82 Reference publications 83 Definitions 94 General requirements 95 Construction 105.1 Circuit conductors 105.1.1 Material 105.1.2 Joints 105.1.3 Sizes 105.1.4 Conduc
23、tor shield 105.2 Bonding conductors 115.2.1 General 115.2.2 Multi-conductor cable 115.2.3 Single-conductor cable 115.3 Insulation 125.3.1 General 125.3.2 Thickness 125.4 Coverings and separators 125.5 Insulation shielding 125.6 Assembly of multi-conductor cables 135.7 Fillers 135.8 Binder 135.9 Inne
24、r jacket 135.9.1 General 135.9.2 Thickness of inner jacket 135.10 Tape over inner jacket (optional) 145.11 Armour 145.11.1 General 145.11.2 Splices 145.11.3 Interior surface 145.11.4 Strip 145.12 Optional outer jacket 155.13 Coding of conductors 156 Marking 156.1 Marking of cables 156.1.1 Manufactur
25、ers marker 15C22.2 No. 131-14Type TECK 90 cableMarch 2014 2014 CSA Group 26.1.2 Type designation 166.1.3 Type of insulation 166.1.4 Low temperature classification 166.1.5 Flame test rating 166.1.6 Cables with aluminum conductors 166.1.7 Acid gas (optional) 166.1.8 Weather resistance (optional) 176.1
26、.9 Legend spacing 176.1.10 Additional marking of cable (optional) 176.2 Marking of coils or reels 177 Tests 187.1 Properties of concentric bonding conductors 187.1.1 Tensile strength of aluminum wires removed from a concentric bonding conductor 187.1.2 Bending test on aluminum wires removed from a c
27、oncentric bonding conductor 187.2 Physical properties of inner jacket 187.3 Heat shock test Thermoplastic inner jacket 187.4 Deformation test Thermoplastic inner jacket 197.5 Protective coating on steel strip 197.6 Condition of interior surface of armour 197.7 Flexibility of armour 197.8 Physical pr
28、operties of outer jacket 207.9 Flexibility at low temperatures 207.10 Low temperature test Impact test 207.11 Deformation Outer thermoplastic jacket 217.12 Flame tests Finished cable 217.12.1 Vertical flame test FT1 (mandatory) 217.12.2 Vertical flame test Cables in cable tray (optional) 217.12.3 Ho
29、rizontal flame test FT6 (optional) 217.13 Dielectric strength test Finished cable 217.14 Insulation resistance Finished cable 227.15 Continuity of conductors Finished cable 227.16 Acid gas evolution (optional) 227.17 Weather resistance test 227.17.1 Inner jacket (optional) 227.17.2 Outer jacket (opt
30、ional) 237.17.3 Insulation (optional) 237.18 Compatibility test Single conductors and individual conductors intended for use in multiple- conductor cables insulated with ethylene propylene rubber 237.19 Spark test 23C22.2 No. 131-14Type TECK 90 cableMarch 2014 2014 CSA Group 3Technical Committee on
31、Wiring ProductsK.L. Rodel Hubbell Canada LP, Pickering, Ontario Category: Producer InterestChairP. Desilets Leviton Manufacturing of Canada Limited, Pointe-Claire, Qubec Category: Producer InterestVice-ChairL. Letea CSA Group, Mississauga, OntarioProject ManagerCategory: General InterestW.J. Burr Bu
32、rr and Associates, Campbell River, British ColumbiaS.W. Douglas International Association of Electrical Inspectors, Toronto, OntarioT. Simmons British Columbia Institute of Technology, Burnaby, British ColumbiaA.Z. Tsisserev AZT Engineering, Electrical and Fire Safety Consulting Services, Port Moody
33、, British ColumbiaCategory: Producer InterestC. Davis Electro Cables Incorporated, Trenton, OntarioD. Drysdale Nexans Canada Inc., Milton, OntarioE. Thompson Atkore International, Harvey, Illinois, USAC22.2 No. 131-14Type TECK 90 cableMarch 2014 2014 CSA Group 4Category: Government and/or Regulatory
34、 AuthorityR.J. Kelly Government of Nunavut, Department of Community b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are proc
35、essed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.5) This Standard is subject to review five years from the date of publication. Suggestions for its improvement will be referre
36、d to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the subject line: a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; a
37、ndd) rationale for the change.C22.2 No. 131-14Type TECK 90 cableMarch 2014 2014 CSA Group 8C22.2 No. 131-14Type TECK 90 cable1 Scope1.1 This Standard applies to single- and multi-conductor Type TECK 90 armoured cable intended for installation in accordance with the Canadian Electrical Code, Part I,
38、on systems having nominal voltages of 5000 V and less and having a maximum temperature rating of 90 C in both dry and wet locations.1.2 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is
39、used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a
40、clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 2 Reference publ
41、icationsThis Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, including all amendments published thereto.CSA GroupC22.1-12 Canadian Electrical Code, Part ICAN/CSA-C22.2 No. 0-10 General requirements Canadian Electrical Code, Pa
42、rt IIC22.2 No. 0.3-09 Test methods for electrical wires and cablesC22.2 No. 38-10 Thermoset-insulated wires and cablesC22.2 No. 239-09 Control and instrumentation cablesC22.2 No. 131-14Type TECK 90 cableMarch 2014 2014 CSA Group 9C22.2 No. 2556-13 Wire and cable test methodsCAN/CSA-C68.5-07 Primary
43、shielded and concentric neutral cable for distribution utilitiesASTM InternationalD746-07 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by ImpactF2617-15 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polym
44、eric Material Using Energy Dispersive X-ray SpectrometryNFPA (National Fire Protection Association)262-2011 Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling SpacesULC (Underwriters Laboratories of Canada)CAN/ULC-S102.4-10 Standard Method of Test for Fire
45、 and Smoke Characteristics of Electrical Wiring, Cables and Non-Metallic Raceways3 DefinitionsThe following definitions shall apply in this Standard:Halogen-free material a material having not more than 0.2 % by weight of total halogen elements.Limited-smoke cable a cable meeting the test classifica
46、tion FT4-ST1.Thermoplastic material a polymeric material that can be repeatedly softened by heating and hardened by cooling and in the softened state can be shaped through the application of force.Thermoset material a polymeric material that, when cross-linked, will not flow on subsequent heating. C
47、ross-linking is accomplished chemically or by irradiation.4 General requirementsGeneral requirements applicable to this Standard shall be in accordance with CAN/CSA-C22.2 No. 0.Note: Where reference is made to a specific number of samples to be tested, the specified number is to be considered a mini
48、mum quantity.C22.2 No. 131-14Type TECK 90 cableMarch 2014 2014 CSA Group 105 Construction5.1 Circuit conductors5.1.1 MaterialConductors shall be stranded and shall consist of aluminum conductor material (ACM) AA8000 Series alloy, soft annealed copper, or coated soft annealed copper complying with th
49、e applicable clauses of CSA C22.2 No. 38.5.1.2 JointsJoints in conductors shall comply with CSA C22.2 No. 38.5.1.3 SizesThe circuit conductor in single-conductor cable shall be not smaller than No. 6 AWG for copper and No. 4 AWG for aluminum. The circuit conductors in multi-conductor cables shall be not smaller than No. 14 AWG for copper and No. 12 AWG for aluminum, except that No. 8 AWG shall be the minimum size of conductor for a voltage rating of 5000 V. In both single- and multi-conductor cables, the maximum conductor
