1、C22.2 No. 166-15Stage and studio luminairesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied
2、 viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis d
3、ocument is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third par
4、tys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT
5、 SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES,
6、LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN
7、ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another
8、 person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this documen
9、t.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA G
10、roup and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that
11、 may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or others intellect
12、ual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the pos
13、sibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their
14、own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a computer for the sole purpo
15、se of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice appears on each such copy.I
16、n addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions
17、contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Standards U
18、pdate ServiceC22.2 No. 166-15June 2015Title: Stage and studio luminairesTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423628.If you require assistan
19、ce, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.ISBN 978-1-77139-915-9 2015 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatso
20、ever without the prior permission of the publisher.Published in June 2015 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463
21、-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Stage and studio luminairesC22.2 No. 166-15C22.2 No. 166-15Stage and studio luminairesJune 2015 2015 CSA Group 1ContentsTechnical Committee on Consumer and Commercial Products 3Integrated Committee
22、on Lighting Products 5Preface 111 Scope 122 Reference publications 123 Definitions 144 General requirements 165 Mechanical construction 165.1 General 165.2 Enclosures 165.2.1 General 165.2.2 Thickness of cast metal 175.2.3 Thickness of sheet metal 175.2.4 Corrosion protection 175.2.5 Ventilating ope
23、nings 175.2.6 Polymeric materials 185.2.7 Lamp containment barriers for tungsten-halogen lamps 215.2.8 Lamp containment and ultraviolet (UV) attenuation barriers for electric discharge lamps 225.2.9 Lamp containment barriers for high-pressure lamps 235.3 Mounting means and safety attachments 235.4 A
24、rms and stems 245.5 Mechanical joints 245.6 Movable joints 255.7 Glass lenses 255.8 Glass UV attenuation barriers 266 Electrical construction 266.1 General 266.2 Wiring devices 276.3 Lampholders 286.4 Switches 286.5 Supply connections 296.6 Fans, motors, and motor controllers 306.6.1 General 306.6.2
25、 Motors 306.6.3 Motor controllers 306.7 Transformers and power supplies 306.8 Integral ballasts and capacitors 316.9 Limited output circuits 356.9.1 Class 1 circuits 35C22.2 No. 166-15Stage and studio luminairesJune 2015 2015 CSA Group 26.9.2 Class 2 circuits 356.10 Separation of circuits 356.11 Iso
26、lation devices 356.12 Conductors 356.13 Spacings 366.14 Bonding 376.15 Strain relief 376.16 Conductor protection 376.17 Integral fuses 386.17.1 General 386.17.2 Fuseholders 386.17.3 Provision for disconnect 386.18 Accessibility of live parts 386.19 Luminaires for wet and damp locations 397 Marking 4
27、07.1 General 407.2 Identification and ratings 407.3 Durability of stamped ink marking test 428 Tests 458.1 General 458.2 Conditions for normal temperature test 458.3 Leakage current 488.4 Dielectric strength 508.5 Humidity 508.6 Weatherproofness 508.7 Loading 508.8 Loading for polymeric accessories
28、518.9 Locked rotor test 518.10 Movable joint rotation 528.11 Movable joint torsion and pull 528.12 Strain relief 52C22.2 No. 166-15Stage and studio luminairesJune 2015 2015 CSA Group 3Technical Committee on Consumer and Commercial ProductsA. Milne 21st Olympiad Sales, Burlington, Ontario Category: G
29、eneral InterestChairD. Mascarenhas Brampton, Ontario Category: General InterestVice-ChairD.P. Badry Yukon Government, Community Services, Whitehorse, Yukon Category: Regulatory AuthorityG. Benjamin Thomas b) provide an explanation of circumstances surrounding the actual field condition; andc) where
30、possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivit
31、ies.csa.ca.5) This Standard is subject to review five years from the date of publication. Suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal for change” i
32、n the subject line: a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.C22.2 No. 166-15Stage and studio luminairesJune 2015 2015 CSA Group 12C22.2 No. 166-15Stage and studio luminaires1 Scope1.1 This Stan
33、dard applies to portable and stationary stage and studio luminaires, integrated controls, and power supplies of all types suitable for use in dry, damp, or wet locations, intended for use in nonhazardous locations and for connection to a supply circuit of 600 V or less between conductors, and design
34、ed to be installed and used in accordance with CSA C22.1, Canadian Electrical Code, Part I (CE Code, Part I).1.2 This Standard does not apply to external power supplies for discharge lamps.1.3 The equipment covered in this Standard is not intended for household use.Note: See Table 7.1, Item 8, for t
35、he corresponding marking.1.4 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an
36、 option or that which is permissible within the limits of the standard.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.Notes to tables and figures are cons
37、idered part of the table or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.1.5 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are
38、 for information and comparison only.2 Reference publicationsThis Standard refers to the following publications, and where reference is made, it shall be to the edition listed below, including all amendments thereto.CSA GroupC22.1-15 Canadian Electrical Code, Part IC22.2 No. 166-15Stage and studio l
39、uminairesJune 2015 2015 CSA Group 13CAN/CSA-C22.2 No. 0-10 (R2015) General requirements Canadian Electrical Code, Part IICAN/CSA-C22.2 No. 0.4-04 (R2013) Bonding of electrical equipmentC22.2 No. 0.15-01 (R2012) Adhesive labelsCAN/CSA-C22.2 No. 0.17-00 (R2013) Evaluation of properties of polymeric ma
40、terialsC22.2 No. 8-13 Electromagnetic interference (EMI) filtersC22.2 No. 14-13 Industrial control equipmentC22.2 No. 18.3-12 Conduit, tubing, and cable fittingsC22.2 No. 66.1-06 (R2011) Low voltage transformers Part 1: General requirementsC22.2 No. 66.3-06 (R2011) Low voltage transformers Part 3: C
41、lass 2 and Class 3 transformersC22.2 No. 77-14 Motors with inherent overheating protectionCAN/CSA-C22.2 No. 94.1-07 (R2012) Enclosures for electrical equipment, non-environmental considerationsCAN/CSA-C22.2 No. 94.2-07 (R2012) Enclosures for electrical equipment, environmental considerationsC22.2 No
42、. 113-12 Fans and ventilatorsCAN/CSA-C22.2 No. 223-M91 (R2013) Power supplies with extra-low-voltage Class 2 outputsC22.2 No. 250.0-08 (R2013) LuminairesCAN/CSA-C22.2 No. 250.13-14 Light emitting diode (LED) equipment for lighting applicationsC22.2 No. 1993-12 Self-ballasted lamps and lamp adaptersC
43、22.2 No. 166-15Stage and studio luminairesJune 2015 2015 CSA Group 14CAN/CSA-C22.2 No. 60950-1-07 (R2012) Information technology equipment Safety Part 1: General requirementsCAN3-C235-83 (R2015) Preferred voltage levels for AC systems, 0 to 50 000 VANSI/IESNA (American National Standards Institute/I
44、lluminating Engineering Society of North America)RP-27 series of Standards Photobiological Safety for Lamps and Lamp Systems3 DefinitionsThe following definitions shall apply in this Standard:Ballast a device that by means of reactance or resistance, singly or in combination, limits the current of a
45、 lamp to the required value for proper operation and, where necessary, provides adequate starting voltage. In the case of rapid start circuits, the ballast provides voltage for low-voltage lamp filament heating.Cheesecloth a cotton material used as an indicator of a fire hazard. The sheet material i
46、s bleached, with an approximate weight of 34 g/m2 (0.11 oz/ft2) and with a thread count in the range of 10 to 13 9 to 12 threads/cm (25 to 33 22 to 30 threads/in).Circuit Circuit, Class 2 a circuit supplied by an isolating source that complies with the requirements of a) CAN/CSA-C22.2 No. 223;b) bot
47、h CSA C22.2 No. 66.1 and CSA C22.2 No. 66.3; orc) the limited power supply (LPS) requirements of CAN/CSA-C22.2 No. 60950-1.Circuit, LED Class 2 a circuit used in light-emitting diode (LED) lighting applications that presents no fire hazards and exhibits voltages that are safe to touch under both nor
48、mal operating conditions and after a single fault condition. An LED Class 2 circuit is supplied by a source with no direct electrical connection between input and output, such as that provided by a transformer or optical isolator. LED Class 2 circuits that are part of the wiring system between LED c
49、ontrolgear and LED modules are classified as Class 2 circuits in accordance with Rule 16-200 of the CE Code, Part I. Note: An LED Class 2 circuit complies with any of the following requirements: a) CAN/CSA-C22.2 No. 223;b) both CSA C22.2 No. 66.1 and CSA C22.2 No. 66.3; orc) the LPS requirements of CAN/CSA-C22.2 No. 60950-1.Circuit, safety extra-low-voltage (SELV) a circuit derived from controlgear that exhibits voltages not considered to pose a risk of electric shock under normal operating conditions and after a single fault. Note: A SEL
