1、C22.2 No. 210-15Appliance wiring material productsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together volunteers representing
2、varied viewpoints and interests to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityTh
3、is document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringementof any third p
4、artys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicablestatute, rule, or regulation.IN NO EVENT
5、 SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LO
6、ST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED
7、 OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person
8、or entity. The information in this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained in this document.CSA Grou
9、p is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and th
10、e users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade secrets that may be conta
11、ined in this document, whether or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or others intellectual property an
12、d may give rise to a right in CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that som
13、e of the elements of this standard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.
14、Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it;
15、search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may
16、 not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Leg
17、al Notice, you may not load or use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceC22.2 No.
18、210-15September 2015Title: Appliance wiring material productsTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2423921.If you require assistance, please
19、e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.ISBN 978-1-4883-0049-3 2015 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoeverwithout t
20、he prior permission of the publisher.Published in September 2015 by CSA GroupA not-for-profit private sector organization178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R3To purchase standards and related publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-
21、747-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Appliance wiring material productsC22.2 No. 210-15C22.2 No. 210-15Appliance wiring material productsSeptember 2015 2015 CSA Group 1ContentsTechnical Committee on Wiring Products 4Integrated Committee on Flexible
22、 Cords/Equipment and Appliance Wires and Cable 6Preface 81 Scope 92 Reference publications 103 Definitions 114 General 124.1 General requirements 124.2 Constructions General 124.3 Flat/parallel constructions 134.4 Temperature ratings 134.5 Voltage ratings 134.6 Fillers Optional 135 Conductors 135.1
23、Size 135.2 Diameter and area 135.3 Stranding 145.4 Material and temperature limits 145.4.1 General 145.4.2 Uncoated copper wires 155.4.3 Tin-coated annealed copper wires 155.4.4 Hard-drawn copper alloy 155.4.5 Copper-clad steel wire 155.4.6 Tin-, silver-, or nickel-coated copper-clad steel 155.4.7 N
24、ickel-coated copper 155.4.8 Silver-coated copper 165.4.9 Nickel-plated iron 165.4.10 Other conductor materials 165.4.11 Other conductor options 165.5 Joints 175.6 DC resistance 175.7 Conductor separator 176 Insulation 177 Binders, barriers, strength member, and separators Optional 188 Coverings Opti
25、onal 189 Shields Optional 19C22.2 No. 210-15Appliance wiring material productsSeptember 2015 2015 CSA Group 210 Jackets 1910.4 Optical fibre members 1911 Tests 2011.1 General 2011.2 Conductor tests 2011.2.1 DC resistance 2011.2.2 Conductor and insulation compatibility 2111.3 Physical properties of e
26、xtruded insulation, insulating coverings, and jackets 2111.3.1 Insulation and insulating coverings 2111.3.2 Jackets 2211.3.3 Flexibility test 2211.3.4 Test for specimens with nylon insulation coverings 2211.3.5 Test for specimens with fibrous or non-fibrous covering including tapes, serves, and brai
27、dsapplied as the outermost layer 2211.3.6 Establishment of parameters and requirements for short-term air oven aging test 2311.4 Dielectric properties of insulation, insulating coverings, and jackets 2311.4.1 Dielectric voltage withstand test of insulation 2311.4.2 Dielectric voltage withstand test
28、of jackets over shields 2411.5 Heat shock and dielectric voltage withstand tests 2411.5.1 Heat shock test 2411.5.2 Dielectric voltage withstand test following heat shock test 2511.6 Cold bend and dielectric voltage withstand tests 2511.6.1 Cold bend test 2511.6.2 Dielectric voltage withstand test fo
29、llowing cold bend test 2611.7 Deformation test 2611.8 Flame test 2711.9 Durability of ink printing test 2711.10 Flexibility and dielectric voltage withstand tests (Group B products only) 2711.10.1 Flexibility test for appliance wiring material products with temperatures 250 C or lower 2711.10.2 Flex
30、ibility test for appliance wiring material products with temperatures above 250 C 2811.10.3 Dielectric voltage withstand test following flexibility test 2811.11 Slow compression test (Group B products only) 2811.11.1 Method 2811.11.2 Performance 2911.11.3 Additional requirements 2911.12 Insulation r
31、esistance tests (Group B products only Optional) 2911.12.1 General 2911.12.2 75 C wet rating thermoset insulation 2911.12.3 90 C wet rating thermoset insulation 2911.12.4 60, 75, or 90 C wet rating thermoplastic and composite insulation 2911.12.5 Continuous applied voltage 3011.13 Permittivity tests
32、 (Group B products only Optional) 3011.13.1 General 3011.13.2 75 or 90 C wet rating thermoset insulation 3011.13.3 60, 75, or 90 C wet rating thermoplastic and composite insulation 3011.14 Oil immersion and fuel oil immersion tests for insulations, insulated coverings, and jackets Optional 3111.14.1
33、 General 31C22.2 No. 210-15Appliance wiring material productsSeptember 2015 2015 CSA Group 311.14.2 Oil immersion test 3111.14.3 Fuel oil immersion test 3111.14.4 Test method 3111.15 Weather resistance test for Class II products Optional 3111.16 Additional tests for Class I, Group B, extruded and no
34、n-extruded, single- and multiple-conductor constructions with voltage ratings greater than 1 kV and up to 10 kV 3111.16.1 Dielectric voltage withstand test at room temperature 3111.16.2 Extended voltage application test 3211.17 Spark test 3212 Markings 3212.1 Markings on products 3212.1.6 Additional
35、 requirements for products with jackets or insulating coverings 3312.2 Markings on tags, reels, and packages 3412.2.1 General 3412.2.2 Markings on products complying with Clause 5.4.11.4 34C22.2 No. 210-15Appliance wiring material productsSeptember 2015 2015 CSA Group 4Technical Committee on Wiring
36、ProductsK.L. Rodel Hubbell Canada LP,Pickering, OntarioCategory: Producer InterestChairP. Desilets Leviton Manufacturing of Canada Limited,Pointe-Claire, QubecCategory: Producer InterestVice-ChairW.J. Bryans Electro-Federation Canada,Toronto, OntarioAssociateW.J. Burr Burr and Associates,Campbell Ri
37、ver, British ColumbiaCategory: General InterestC. Davis Electro Cables Incorporated,Trenton, OntarioCategory: Producer InterestS.W. Douglas International Association of Electrical Inspectors,Toronto, OntarioCategory: General InterestD. Drysdale Nexans Canada Inc.,Milton, OntarioCategory: Producer In
38、terestS.P. Hawkins Shawflex A Division of ShawCor Ltd.,Toronto, OntarioAssociateR.J. Kelly Government of Nunavut-Dept of Community b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” a
39、nswer will address theissue.Committee interpretations are processed in accordance with the CSA Directives and guidelinesgoverning standardization and are available on the Current Standards Activities page atstandardsactivities.csa.ca.5) This Standard is subject to review five years from the date of
40、publication. Suggestions for its improvement willbe referred to the appropriate committee. To submit a proposal for change, please send the followinginformation to inquiriescsagroup.org and include “Proposal for change” in the subject line:a) Standard designation (number);b) relevant clause, table,
41、and/or figure number;c) wording of the proposed change; andd) rationale for the change.C22.2 No. 210-15Appliance wiring material productsSeptember 2015 2015 CSA Group 9C22.2 No. 210-15Appliance wiring material products1 Scope1.1This Standard applies to single- or multiple-conductor, round, flat, or
42、coiled appliance wiring materialproducts classified as follows:a) Class I internal wiring of equipment (single- or multiple-conductor constructions with or withoutan insulating covering, covering or jacket):i) Group A not subject to mechanical abuse; andii) Group B potentially subject to mechanical
43、abuse;b) Class II external/interconnecting wires (single- or multiple-conductor constructions with ajacket):i) Group A not subject to mechanical abuse; andii) Group B potentially subject to mechanical abuse.Notes:1) As there is a great variety of applications for appliance wiring material products,
44、the use of such a productshould be evaluated with the design and construction of the end-use application in mind and should not bejudged solely by the requirements of this Standard.2) Class I and II products are Group A, B, or both.3) Group markings (A, B, or both) relate to tests performed on the i
45、ndividual insulated conductors. Groupmarking that includes both A and B means all insulated conductors pass Group B tests.4) See Clause 4.2.1.2This Standard also applies to appliance wiring material products that have a jacket or overall insulatingcovering and are used to connect or interconnect dat
46、a processing and similar systems in accordancewith the Canadian Electrical Code, Part I and CAN/CSA-C22.2 No. 0.1.3The values given in SI units are the units of record for the purposes of this Standard. The values given inparentheses are for information and comparison only.1.4In this Standard,“shall
47、” is used to express a requirement, i.e., a provision that the user is obliged tosatisfy in order to comply with the standard; “should” is used to express a recommendation or thatwhich is advised but not required; and “may” is used to express an option or that which is permissiblewithin the limits o
48、f the Standard.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of anote accompanying a clause is to separate from the text explanatory or informative material.Notes to tables and figures are considered part of the table or figure and may be written asr
49、equirements.C22.2 No. 210-15Appliance wiring material productsSeptember 2015 2015 CSA Group 10Annexes are designated normative (mandatory) or informative (non-mandatory) to define theirapplication.2 Reference publicationsThis Standard refers to the following publications, and where such reference is made, it shall be to theedition listed below, including all amendments published thereto.CSA GroupC22.1-15Canadian Electrical Code, Part ICAN/CSA-C22.2 No. 0-10General Requirements Canadian Electrical Code, Part IIC22.2 No. 38-14Th
