1、C22.2 No. 232-09Optical fiber cablesLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interes
2、ts to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without a
3、ny representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rig
4、hts. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUB
5、SIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR D
6、AMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY,
7、LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is dir
8、ected to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes volunt
9、ary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form
10、), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets a
11、re protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for suc
12、h use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not b
13、e held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and
14、 non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies
15、of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from th
16、e attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do
17、make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.Update No. 1C22.2 No. 232-09November 2014Note: For information about the Standards Update Service, go to shop.csa.ca or e-mail techsupport
18、csagroup.org.Title: Optical fiber cables originally published September 2009The following revisions have been formally approved and are marked by the symbol delta () in the margin on the attached replacement pages:Revised Clauses 6.1.1, 6.1.2, 6.13, and 7.1New NoneDeleted Clause 6.1.4 Update your co
19、py by inserting these revised pages.Keep the pages you remove for reference. 2014 CSA Group Optical fiber cablesNovember 20146 Tests6.1 Flammability6.1.1 FT4 flame test 6.1.1.1 The FT4 flame test specified in Clause 6.1.1.2 shall apply to cables marked OFC, OFCH, OFN, OFNH, OFNR, OFCR, OFNG, and OFC
20、G.6.1.1.2 When tested in accordance with the FT4 test in CAN/CSA-C22.2 No. 2556, the cable shall not exhibit a char length in excess of 1.5 m.6.1.2 FT4-ST1 flame test6.1.2.1 The FT4-ST1 flame test specified in Clause 6.1.2.2 shall apply to cables marked OFNR, OFCR, OFCG, and OFNG.6.1.2.2 When tested
21、 in accordance with the requirements of ASTM D5424 and the ST1 limited smoke test in CAN/CSA-C22.2 No. 2556, the completed cable shall not have a char length exceeding 1.5 m or smoke release exceeding the requirements of the FT4-ST1 classification.6.1.3 FT6 flame and smoke test 6.1.3.1 The FT6 flame
22、 and smoke test specified in Clause 6.1.3.2 shall apply to cables marked OFNP and OFCP.6.1.3.2 Cables marked FT6 in accordance with the requirements of Clause 7.1(f) shall comply with the requirements of the FT6 horizontal flame and smoke test in CSA C22.2 No. 0.3.6.2 Thermal aging of jacketsWhen te
23、sted in an air oven in accordance with the physical properties test in CAN/CSA-C22.2 No. 2556, the retention of tensile strength and elongation of the specimen shall be at least 65% for thermoplastic and at least 50% for thermoset.The oven temperature during the accelerated aging and the duration th
24、ereof shall be as follows:Temperature rating of jacket (C)Aging temperature (2C)Aging time (days)60 75 90 105 125 150100 100 121 136* 158 18071077*77*An alternative test of 121 2 C for 21 days may be performed.3(Replaces p. 3, September 2009)C22.2 No. 232-09 2014 CSA GroupNovember 20146.3 Cold bendA
25、 specimen of finished cable shall be conditioned at a temperature of 18 1 C for a period of 4 h and, while still at this temperature, wound three close turns around a cylindrical mandrel having a diameter ten times the cable diameter. The jacket shall show no visible cracks when examined under norma
26、l or corrected-to-normal vision.The cold bend test shall be performed in accordance with the cold bend test in CAN/CSA-C22.2 No. 2556.6.4 Continuity of conductive membersConductive members shall be tested in accordance with the continuity test in CAN/CSA-C22.2 No. 2556. The conductive members of eac
27、h finished length shall exhibit continuity.6.5 Weather (sunlight) resistance optionalWhen tested in accordance with the weather (sunlight) resistance test in CAN/CSA-C22.2 No. 2556, the jacket shall retain 80% of its unconditioned tensile strength and elongation values following exposure for 1000 h
28、in a weatherometer.7 Markings7.1 Marking on productsFinished cable shall be legibly and durably surface-marked at a maximum interval of 1 m to show(a) manufacturers identification (name, type designation, trademark, or colour threads);(b) type designation;(c) flame classification FT4 for cables meet
29、ing the requirements of Clause 6.1.1;(d) flame classification FT4-ST1 for cables meeting the requirements of Clause 6.1.2;(e) flame classification FT6 for cables meeting the requirements of Clause 6.1.3;(f) temperature rating (if above 60 C); and(g) “SR” or “SUN RES” or “SUNLIGHT RESISTANT” if the c
30、able meets the requirements of Clause 6.5.7.2 Package markingEach reel or carton shall be identified with(a) manufacturers identification (name or trademark);(b) type designation; and(c) year and month of manufacture (a code may be used).7.3 Optional marking The following additional information may
31、be supplied at the discretion of the manufacturer:(a) length;(b) nominal outside diameter; and(c) number of fibers.(Replaces p. 4, September 2009)4Standards Update ServiceC22.2 No. 232-09September 2009Title: Optical fiber cablesPagination: 12 pages (viii preliminary and 4 text), each dated September
32、 2009To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2420133.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit
33、CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.Blank pagePublished in September 2009 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727
34、416-747-4044Visit our Online Store at www.ShopCSA.caC22.2 No. 232-09Optical fiber cablesCSA Standard100%ISBN 978-1-55491-210-0Technical Editor: Leonard Letea Canadian Standards Association 2009All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior
35、 permission of the publisher.To purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.The Canadian Standards Association (CSA) prints its publications on Rolland Enviro100, which contains 100% recycled post-consume
36、r fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.September 2009 iiiContents Canadian Standards Association Optical fiber cablesTechnical Committee on Wiring Products ivSubcommittee on Control, Instrument, Communication, and Marine Cables vPreface vi
37、ii1Scope 12 Reference publications 13 Definitions 24 General requirements 25 Construction 25.1 General 25.2 Conductive members 25.3 Jackets 26 Tests 36.1 Flammability 36.1.1 FT1 flame test 36.1.2 FT4 flame test 36.1.3 FT4-ST1 flame test 36.1.4 FT6 flame and smoke test 36.2 Thermal aging of jackets 3
38、6.3 Cold bend 46.4 Continuity of conductive members 46.5 Weather (sunlight) resistance optional 47Markings 47.1 Marking on products 47.2 Package marking 47.3 Optional marking 4C22.2 No. 232-09 Canadian Standards Associationiv September 2009Technical Committee on Wiring ProductsK. Rodel Hubbell Canad
39、a,Pickering, OntarioRepresenting ManufacturersChairS. Paulsen New Brunswick Department of Public Safety,Fredericton, New BrunswickRepresenting Regulatory AuthoritiesVice-ChairB. Haydon Canadian Standards Association,Mississauga, OntarioProject ManagerRepresenting Regulatory AuthoritiesG. Montminy Rg
40、ie du btiment du Qubec,Qubec, QubecT. Olechna Electrical Safety Authority,Mississauga, OntarioA. Tsisserev City of Vancouver,Vancouver, British ColumbiaRepresenting ManufacturersC. Davis Electro Cables Incorporated,Trenton, OntarioP. Desilets Leviton Manufacturing of Canada Limited,Pointe-Claire, Qu
41、becB.F. OConnell Tyco Thermal Controls (Canada) Ltd.,Trenton, OntarioD.S. Reith Nexans Canada Inc.,Markham, OntarioRepresenting General InterestsB. Beland Sherbrooke, QubecD.H. Dunsire Winnipeg, ManitobaConsumer RepresentativeC. Samuels ConocoPhillips Canada Ltd.,Calgary, AlbertaT. Simmons British C
42、olumbia Institute of Technology,Burnaby, British Columbia Canadian Standards Association Optical fiber cablesSeptember 2009 vSubcommittee on Control, Instrument, Communication, and Marine CablesD. Drysdale Nexans Canada Inc.,Fergus, OntarioChairS. Hawkins ShawCor Ltd.,Toronto, OntarioVice-ChairE. Ab
43、erbach General Cable Industries, Inc.,Willimantic, Connecticut, USAJ. Baer Superior Telecommunications Inc.,Atlanta, Georgia, USAT.S. Bhat Rockbestos-Surprenant Cable Corporation,East Granby, Connecticut, USAR. Blair Draka Cableteq USA,North Dighton, Massachusetts, USAR. Bright AmerCable, Inc.,Houst
44、on, Texas, USAM. Cadorette Produits Shell Canada Limite,Montral, QubecJ.R. Cancelosi The Okonite Company,Ramsey, New Jersey, USAW.F. Constantine Draka Cableteq USA,North Dighton, Massachusetts, USAT. Corder Underwriters Laboratories Inc.,Research Triangle Park, North Carolina, USAC. Davis Electro Ca
45、bles Incorporated,Trenton, OntarioG. Davis Electro Cables Incorporated,Trenton, OntarioG.L. Dorna Belden Wire (b) provide an explanation of circumstances surrounding the actual field condition; and(c) be phrased where possible to permit a specific “yes” or “no” answer.Committee interpretations are p
46、rocessed in accordance with the CSA Directives and guidelines governing standardization and are published in CSAs periodical Info Update, which is available on the CSA Web site at www.csa.ca. Canadian Standards Association Optical fiber cablesSeptember 2009 1C22.2 No. 232-09Optical fiber cables1Scop
47、e1.1This Standard applies to non-conductive optical fiber cable and conductive optical fiber cable intended to be installed indoors in non-hazardous locations in accordance with the Canadian Electrical Code, Part I.1.2This Standard does not cover hybrid optical fiber cables whose construction (exclu
48、ding the optical fiber component) is covered in other applicable standards of the Canadian Electrical Code, Part II.1.3In CSA Standards, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a
49、 recommendation or that which is advised but not required; “may” is used to express an option or that which is permissible within the limits of the standard; and “can” is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designat
