1、C22.2 No. 62-93(reaffirmed 2013)Surface raceway systemsLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers represe
2、nting varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of lia
3、bilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of a
4、ny third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation
5、. IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENT
6、IAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GR
7、OUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or enti
8、ty to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in
9、 this document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipA
10、s between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and tra
11、de secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or o
12、thers intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is d
13、rawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is
14、entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOL
15、EPURPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ and (b) requirements for nonmetallic surface raceways in addition to metal raceways. The following bulletin has been incorporated: Number Subject 808A Requirements for Nonmetallic Surface Raceways and Fittings. For gene
16、ral information on the Standards of the Canadian Electrical Code, Part Il, see the preface of the latest issue of CSA Standard CAN/CSA-C22.2 No. 0, General Requirements Canadian Electrical Code, Part II. This Standard was prepared by a Subcommittee of the Technical Committee on Wiring Products under
17、 the jurisdiction of the Steering Committee on the Canadian Electrical Code, Part II and was formally approved by these Committees. July 1993 Notes: (1) Use of the singular in this Standard does not exclude the plural (and vice versa) when the sense allows. (2) A/though the intended primary applicat
18、ion of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. (3) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the
19、appropriate committee. (4) All enquiries regarding this Standard, including requests for interpretation, should be addressed to Canadian Standards Association, Standards Division, 178 Rexdale Boulevard, Rexdale, Ontario M9W 1 R3. Requests for interpretation should (a) define the problem, making refe
20、rence to the specific clause, and, where appropriate, include an illustrative sketch; (b) provide an explanation of circumstances surrounding the actual field condition; and (c) be phrased where possible to permit a specific “yes“ or “no“ answer. Interpretations are published in CSA s periodical Inf
21、o Update. For subscription details, write to CSA Sales Promotion, Info Update, at the address given above. 8 July 1993 Surface Raceway Systems Foreword The Canadian Standards Association provides certification services for manufacturers who, under license from CSA, wish to use the appropriate regist
22、ered CSA Marks on certain products of their manufacture to indicate conformity with CSA Standards. CSA Certification for a number of products is provided in the interest of maintaining agreed- upon standards of quality, performance, interchangeability and/or safety, as appropriate. Where applicable,
23、 certification may form the basis for acceptance by inspection authorities responsible for enforcement of regulations. Where feasible, programs will be developed for additional products for which certification is desired by producers, consumers or other interests. In performing its functions in acco
24、rdance with its objectives, CSA does not assume or undertake to discharge any responsibility of the manufacturer or any other party. The opinions and findings of the Association represent its professional judgement given with due consideration to the necessary limitations of practical operation and
25、state of the art at the time the Standard is processed. Products in substantial accord with this Standard but which exhibit a minor difference or a new feature may be deemed to meet the Standard providing the feature or difference is found acceptable utilizing appropriate CSA Certification Division
26、Operating Procedures. Products which comply with this Standard shall not be certified if they are found to have additional features which are inconsistent with the intent of this Standard. Products shall not be certifiable if they are discovered to contravene applicable Federal laws or regulations.
27、Testing techniques, test procedures and instrumentation frequently must be prescribed by the CSA Certification Division in addition to the technical requirements contained in Standards of CSA. In addition to markings specified in the Standard the CSA Certification and Testing Division may require sp
28、ecial cautions, markings and instructions that are not specified by the Standard. Some tests required by CSA Standards may be inherently hazardous. The Association neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever perfor
29、med, whether performed in whole or in part by the manufacturer or the Association, and whether or not any equipment, facility or personnel for or in connection with the test is furnished by the manufacturer or the Association. Manufacturers should note that, in the event of the failure of the CSA Ce
30、rtification and Testing Division to resolve an issue arising from the interpretation of requirements, there is an appeal procedure: the complainant should submit the matter, in writing, to the Secretary of the Canadian Standards Association. If this Standard is to be used in obtaining CSA Certificat
31、ion please remember, when making application for certification, to request all current Amendments, Bulletins, Notices and Technical Information Letters that may be applicable and for which there may be a nominal charge. For such information or for further information concerning details about CSA Cer
32、tification please address your inquiry to the Applications and Records Section, Canadian Standards Association, 178 Rexdale Boulevard, Rexdale (Toronto), Ontario M9W 1 R3. JvIy 1993 9 Surface Raceway Systems C22.2 No. 62-93 Surface Raceway Systems 1. Scope 1.1 These requirements apply to metal and n
33、onmetallic surface raceway systems and combinations thereof intended for installations in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 These requirements do not apply to lighting equipment as specified in CSA Standard C22.2 No. 9, wireways as specified in CSA Standard 022.2
34、 No. 26, or cable trays as specified in CSA Standard CAN/CSA-C22.2 No. 126. 1.3 The values given in SI (metric) units are the standard. The values given in parentheses are for information only. 2. Definitions 2.1 The following definitions apply in this Standard: Accessorya component that may be adde
35、d to a raceway system for a special purpose (eg, guards, hangers, retainers). Fittingany component used to connect, change direction, or terminate a surface raceway (eg, adapter, coupling, cross, device box, elbow, end cap, tee). Surface racewaya surface-mounted or pendent enclosure, consisting of o
36、ne or more channels for the purpose of containing and protecting conductors and intended to accommodate associated fittings, wiring devices, luminaires, and accessories. Surface raceway systema system composed of a surface raceway, associated fittings, and may include wiring devices and accessories.
37、 Wiring devicea unit of an electrical system that is intended to carry, and may utilize, electrical energy within a raceway system (eg, switches, lampholders, receptacles, GFCI, connectors for communication systems, etc). July1993 11 C22.2 No. 62-93 3. General Requirements and Reference Publications
38、 3.1 General Requirements General requirements applicable to this Standard are contained in CSA Standard CAN/CSA- C22.2 No. 0, General RequirementsCanadian Electrical Code, Part II. 3.2 Reference Publications 3.2.1 Where reference is made to CSA Standards of the Canadian Electrical Code, Parts I and
39、 II, such reference shall be considered to refer to the latest editions and amendments thereto, unless otherwise specified. This Standard refers to the following such Standards and the year dates shown indicate the latest editions available at the time of printing. CSA Standards 022.1-1990, Canadian
40、 Electrical Code, Part I; CAN/CSA-C22.2 No. 0-M91, General RequirementsCanadian Electrical Code, Part II; CAN/CSA-C22.2 No. 0.17-92, Evaluation of Properties of Polymeric Materials; 022.2 No. 9-Mi 989, Luminaires; CAN/CSA-C22.2 No. 18-92, Outlet Boxes, Conduit Boxes, and Fittings; C22.2 No. 26-1952,
41、 Construction and Test of Wire ways, Auxiliary Gutters and Associated Fittings; 022.2 No. 42-Mi 984, General Use Receptacles, Attachment Plugs, and Similar Wiring Devices; C22.2 No. 111-Mi 986 (R1992), General Use Switches; CAN/CSA-C22.2 No. i26-M91, Cable Tray Systems; CAN/CSA-C22.2 No. 1 82.4-M90,
42、 Plugs, Receptacles, and Connectors for Communication Systems. 3.2.2 This Standard refers to the following publications and where such reference is made it shall be to the edition listed below, including all amendments published thereto: 12 July 1993 Surface Raceway Systems ASTM* Standards A239-89,
43、Test Method for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles by the Preece Test (Copper Sulphate Dip); D618-61 (1990), Practice for Conditioning Plastics and Electrical Insulating Materials for Testing; 0648-82 (1988), Test Method for Deflection Temperature of
44、Plastics Under Flexural Load; D2152-80 (1986), Test Method for Degree of Fusion of Extruded Poly( Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion; D3359-90, Test Method for Measuring Adhesion by Tape Test; D3363-74 (1989), Test Method for Film Hardness by Pencil Test; D4145-83 (1
45、990), Test Method for Coating Flexibility of Prepain ted Sheet. American Society for Testing and Materials. 4. Construction 4.1 General 4.1.1 A surface raceway system when assembled in accordance with the manufacturers instructions shall provide a complete enclosure for the protection of the wiring
46、and devices installed therein. An external gap of any length is acceptable when tested sucessfully in accordance with Clause 6.2, using a 1 .6 mm diameter probe. 4.1.2 A surface raceway shall include one or more channels with an integral or separate base and cover that together form the complete enc
47、losure, and it shall not have any gap through which wires can be passed from one channel to the other. A gap(s) of any length is acceptable when tested successfully in accordance with Clause 6.2, using a 2 mm diameter probe. If the gap(s) exceeds 2 mm up to a maximum 3.2 mm, a wire retainer(s) shall
48、 be provided, and the installation instructions shall clearly indicate the maximum interval between retainers. 4.1.3 Raceways and components shall be free of sharp edges or projections when assembled as intended. July 1993 13 C22.2 No. 62-93 4.1.4 Components shall conform to the particular Canadian
49、Electrical Code, Part II Standard covering such components, insofar as applicable, and shall be suitable for the application. 4.1.5 Nonmetallic raceway shall not be the sole support of luminaires, lampholders, or indicating lights over 5 W unless tested and marked. Note: Nonmetallic raceway can be supplied with a fitting which is intended to support luminaires and lampholders and is provided with means o
