1、C22.2 No. 96.2-15Down tower power cables for wind turbine applications rated 2 35 kVLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process bring
2、s together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Di
3、sclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability,
4、 or its non-infringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable
5、 statute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMI
6、TED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF T
7、HIS DOCUMENT, EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any dut
8、y owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on
9、the information contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual prop
10、erty rights and ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary),
11、and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that p
12、rotect CSA Groups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.P
13、atent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of
14、any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this do
15、cument onto a computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this
16、 Legal Notice appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not ag
17、ree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and co
18、nditions of this Legal Notice.Standards Update ServiceC22.2 No. 96.2-15July 2015Title: Down tower power cables for wind turbine applications rated 2 35 kVTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will n
19、eed to register for updates to this publication is 2423601.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.ISBN 978-1-77139-892-3 2015 CSA Group All
20、 rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher.Published in July 2015 by CSA Group A not-for-profit private sector organization 178 Rexdale Boulevard, Toronto, Ontario, Canada M9W 1R3 To purchase standards and rela
21、ted publications, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Down tower power cables for wind turbine applications rated 2 35 kVC22.2 No. 96.2-15C22.2 No. 96.2-15Down tower powe
22、r cables for wind turbine applications rated 2 35 kVJuly 2015 2015 CSA Group 1ContentsTechnical Committee on Wiring Products 3Subcommittee on Portable and Mine Power Cables 5Preface 71 Scope 82 Reference publications 93 Definitions and abbreviations 103.1 Definitions 103.2 Abbreviations 104 General
23、requirements 114.1 General 114.2 Torsional test (not required for certification) 114.3 Tray cable test 115 Thermoset, metallic, three-conductor, round flexible power cables for wind turbines down tower, rated 5 to 35 kV 115.1 Three-conductor Type HV-DT cables rated 5 to 35 kV 115.1.1 General 115.1.2
24、 Construction 115.2 Construction 125.2.1 Power conductors 125.2.2 Bonding conductors 135.2.3 Insulation 135.2.4 Metallic shielding 145.2.5 Assembly 155.2.6 Jackets 155.3 Marking 175.3.1 Product marking 175.3.2 Package marking 175.3.3 Alternative marking 175.4 Tests 175.4.1 General 175.4.2 Dielectric
25、 voltage withstand test 185.4.3 Insulation resistance test for power conductors 185.4.4 Test for permittivity and power factor of insulated power conductors 185.4.5 Test for partial discharge 185.4.6 Test for accelerated water absorption of insulated power conductors (Optional) 195.4.7 FT4 flame tes
26、t 195.4.8 Volume resistivity test 195.4.9 Cold bend test 205.4.10 Weather resistance test (optional) 20C22.2 No. 96.2-15Down tower power cables for wind turbine applications rated 2 35 kVJuly 2015 2015 CSA Group 26 Single-conductor cables for rated 2 kV (DLO-DT) 207 Single-conductor cables for rated
27、 5 to 35 kV 207.1 General 207.2 Type SH-DT cables rated 5, 8, 15, 25, and 35 kV 207.2.1 General 207.2.2 Construction 207.2.3 Vertical flame (FT4) 227.2.4 Smoke test (optional) 227.3 Marking 227.3.1 Product marking 227.3.2 Package marking 237.3.3 Alternative marking 237.4 Tests 237.4.1 General 237.4.
28、2 Dielectric voltage withstand test 237.4.3 Insulation resistance test 237.4.4 Test for permittivity and power factor of insulated power conductors Type SH-DT only 237.4.5 Test for accelerated water absorption of insulated conductors 247.4.6 FT4 flame test 247.4.7 Volume resistivity test 247.4.8 Col
29、d bend test 247.4.9 Test for partial discharge 247.4.10 Weather resistance test 24Annex A (normative) Partial discharge (corona) test procedure 37Annex B (informative) Bending radii 38Annex C (informative) Cross-sections 39Annex D (Informative) Use of electrical conductors as the sole pulling means
30、for vertical installation of cables 40C22.2 No. 96.2-15Down tower power cables for wind turbine applications rated 2 35 kVJuly 2015 2015 CSA Group 3Technical Committee on Wiring ProductsK.L. Rodel Hubbell Canada LP, Pickering, Ontario Category: Producer InterestChairP. Desilets Leviton Manufacturing
31、 of Canada Limited, Pointe-Claire, Qubec Category: Producer InterestVice-ChairW.J. Bryans Electro-Federation Canada, Toronto, Ontario AssociateW.J. Burr Burr and Associates, Campbell River, British Columbia Category: General InterestC. Davis Electro Cables Incorporated, Trenton, Ontario Category: Pr
32、oducer InterestS.W. Douglas International Association of Electrical Inspectors, Toronto, Ontario Category: General InterestD. Drysdale Nexans Canada Inc, Milton, Ontario Category: Producer InterestS.P. Hawkins Shawflex A Division of ShawCor Ltd., Toronto, Ontario AssociateR.J. Kelly Government of Nu
33、navut-Dept of Community b) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives
34、and guidelines governing standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.5) This Standard is subject to review five years from the date of publication. Suggestions for its improvement will be referred to the appropriate committee. To submit a
35、proposal for change, please send the following information to inquiriescsagroup.org and include “Proposal for change” in the subject line: a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.C22.2 No. 96.2
36、-15Down tower power cables for wind turbine applications rated 2 35 kVJuly 2015 2015 CSA Group 8C22.2 No. 96.2-15Down tower power cables for wind turbine applications rated 2 35 kV1 Scope1.1 This Standard specifies construction and testing requirements for single conductor rated 2 kV, single metalli
37、c shielded or three conductor metallic shielded power cables rated 5 kV to 35 kV, normally used in wind turbine down tower applications where the cables are subject to frequent flexing and where installation is in accordance with the Canadian Electrical Code, Part I.1.2 The cable constructions speci
38、fied in this Standard are suitable for use at a maximum conductor temperature of 90 C under normal operating conditions in wet or dry locations, in the down towers of wind turbines.1.3 This Standard specifies the following categories of thermoset insulated cables:ClauseCategory5 Three-conductor meta
39、llic shielded, round flexible power cables for wind turbines, rated 5 kV to 35 kV6 DLO-DT cable, single conductor, used for general permanent applications rated 2 kV7 Single-conductor metallic shielded, round flexible power cables for wind turbines, rated 5 kV to 35 kV1.4 The values given in SI (met
40、ric) units are the standard. The values given in parentheses are for information only.1.5 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which
41、 is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory
42、 or informative material.Notes to tables and figures are considered part of the table or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.C22.2 No. 96.2-15Down tower power cables for wind turbine applica
43、tions rated 2 35 kVJuly 2015 2015 CSA Group 92 Reference publicationsThis Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, including all amendments published thereto.CSA GroupC22.1-15 Canadian Electrical Code, Part ICAN/CSA-C22
44、.2 No. 0-10 (R2015) General Requirements Canadian Electrical Code, Part IIC22.2 No. 96-13 Portable power cablesC22.2 No. 230-09 (R2014) Tray cablesCAN/CSA-C22.2 No. 2556-13 Wire and cable test methodsC68.10-14 Shielded power cables for commercial and industrial applications, 5 46 kVASTM (American So
45、ciety for Testing and Materials)B33-10 (R2014) Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical PurposesB172-10 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical ConductorsB173-10 Standard Specification for Rope-
46、Lay-Stranded Copper Conductors Having Concentric- Stranded Members, for Electrical ConductorsB174-10 (2010) Standard Specification for Bunch-Stranded Copper Conductors for Electrical ConductorsD746-14 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by ImpactD3182-07 Stand
47、ard Practice for Rubber Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized SheetsD4496-13 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive MaterialsC22.2 No. 96.2-15Down tower power cables for wind turbine applications
48、rated 2 35 kVJuly 2015 2015 CSA Group 103 Definitions and abbreviations3.1 DefinitionsThe following definitions shall apply in this Standard:DLO-DT a round, single-conductor, flexible, insulated, power cable for installation in wind turbine tower applications, rated 2 kV.HV-DT cable a round three-co
49、nductor, flexible, insulated, power cable with metallic shield for installation in wind turbine down tower applications, rated 5 to 35 kV.Insulation levels 100% level the insulation level of cables used on systems that are provided with relay protection that clears ground faults as rapidly as possible, but in any case within 1 min. Note: While cables with 100% level insulation are appropriate for the majority of cable installations on grounded systems, they also may be used on other systems for which the application of
