CSN 01 4366-1966 Tolerances for buttress screw thread for nuts《螺母倒牙螺纹公差》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7197-2013 red 8750 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)《尺寸规格为2至22 (2-22) 的女性孕妇的人体测量标准表》.pdf

ASTM D7198-2005 Standard Specification for Disposable Embalming Gloves for Single-Use Applications《一次性防腐手套的标准规范》.pdf

ASTM D7198-2005(2012) 8750 Standard Specification for Disposable Embalming Gloves for Single-Use Applications《一次性防腐手套的标准规范》.pdf

ASTM D7198-2005(2018) 5000 Standard Specification for Disposable Embalming Gloves for Single-Use Applications.pdf

ASTM D7199-2007 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models《用基于力学模式的增强胶合层压木材(胶合层木)梁建立.pdf

ASTM D7199-2007(2012) 1250 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models《用基于力学模式的增强胶合层压.pdf

ASTM D7200-2006 Standard Practice for Sampling and Counting Airborne Fibers Including Asbestos Fibers in Mines and Quarries by Phase Contrast Microscopy and Transmission Electron M.pdf

ASTM D7200-2012 red 9375 Standard Practice for Sampling and Counting Airborne Fibers Including Asbestos Fibers in Mines and Quarries by Phase Contrast Microscopy and Transmission E.pdf

ASTM D7201-2006 Standard Practice for Sampling and Counting Airborne Fibers Including Asbestos Fibers in the Workplace by Phase Contrast Microscopy (with and Option of Transmission.pdf