CSN 02 2924-1953 Lock ring of bushing《保险环金属扣眼》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4715-1998(2012) Standard Test Method for Coking Value of Tar and Pitch (Alcan)《焦油和硬沥青焦化值测定的标准试验方法(Alcan)》.pdf

ASTM D4715-1998(2017) Standard Test Method for Coking Value of Tar and Pitch (Alcan)《测定焦油和硬沥青(Alcan)焦化值的标准试验方法》.pdf

ASTM D4716 D4716M-2014 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head《采用定水头法测定土工合.pdf

ASTM D4716-2004 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head《使用恒定压头测定土工合成织物(在平面中)单位宽度流速和.pdf

ASTM D4716-2008 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head《使用恒定压头测定土工合成织物(在平面.pdf

ASTM D4716-2008(2013) Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head《使用恒定压头测定土工合成.pdf

ASTM D4718 D4718M-2015 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles《修正含有超大颗粒土壤的单位重量和含水量的标准实施规程》.pdf

ASTM D4718-1987(2007) Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles《含有超大颗粒土壤的单位重量和含水量的修正标准实施规程》.pdf

ASTM D4720-1987(2000) Standard Practice for Evaluation of the Performance of Soft Window Coverings《软窗帘性能评定的标准实施规程》.pdf