CSN 13 4309-2-1994 Industrial armatures Safety valves - Part 2 Technical requirements《工业电枢 安全阀 第2部分：技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 1624-1989 液体火箭发动机参数符号.pdf

QJ 1625-1989 固体火箭发动机参数符号.pdf

QJ 1626-1989 冲压发动机参数符号.pdf

QJ 1627-1989 复合固体推进剂药浆摩擦感度测定方法.pdf

QJ 1628-1989 复合固体推进剂药浆冲击感度测定方法.pdf

QJ 1630-1989 锤上自由锻件机械加工余量与尺寸偏差.pdf

QJ 1632-1989 碳纤维增强塑料薄板冲击韧性试验方法.pdf

QJ 1634-1989 无机胶粘剂压剪强度试验方法.pdf

QJ 1634A-1996 胶粘剂压缩剪切强度试验方法.pdf