CSN 13 7451-1966 Hose pipe connections with pin for gas appliances《气体装置带销软管连接头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 1762.5-1989 橡胶模具标准结构 二板式矩形橡胶压模.pdf

QJ 1762.6-1989 橡胶模具标准结构 三板式矩形橡胶压模.pdf

QJ 1762.7-1989 橡胶模具标准结构 四板式矩形橡胶压模.pdf

QJ 1762.8-1989 橡胶模具标准结构 五板式矩形橡胶压模.pdf

QJ 1763.1-1989 橡胶模具典型结构 45°分型橡胶压模.pdf

QJ 1763.2-1989 橡胶模具典型结构 多型腔橡胶压模.pdf

QJ 1763.3-1989 橡胶模具典型结构 45°分型橡胶压模.pdf

QJ 1763.4-1989 橡胶模具典型结构 45°分型橡胶压模.pdf

QJ 1763.5-1989 橡胶模具典型结构 O型密封圈橡胶压模.pdf