CSN 20 0200-1975 Metal-working machines Terminology of machines tools《金属加工机械 术语》.pdf

相关资源

SH T 0665-1998 润滑剂和有关产品（L类）—M组（金属加工）—制定标准的导则.pdf

GB T 32812-2016 金属加工液 有害物质的限量要求和测定方法.pdf

DB11 T 133-2001 金属加工设备修理通用技术条件.pdf

GB T 7631.5-1989 润滑剂和有关产品(L类)的分类 第5部分 M组(金属加工).pdf

SH T 0665-1998 润滑剂和有关产品(L类)―M组(金属加工)―制定标准的导则.pdf

GB T 32812-2016 金属加工液 有害物质的限量要求和测定方法.pdf

ASTM D4627-2012(2017) Standard Test Method for Iron Chip Corrosion for Water&x2013 Miscible Metalworking Fluids《水溶性金属加工液的铁片腐蚀用标准试验方法》.pdf

STAS 10114-1991 Non-emulsifyable oils for metals working P1H P1A and P1B Oils《用于金属加工的非乳化油 P1H，P1A和P1B油 》.pdf

ANSI ASTM E2523-2013 Standard Terminology for Metalworking Fluids and Operations《金属加工液和操作的术语》.pdf

STAS 5943-1981 METALS WORKING BY DEFORMA- TION AND SEGREGATION Glossary of terms《变形和偏析金属加工 术语表》.pdf

猜你喜欢

AIR FORCE A-A-59724 C-2010 TRUCK FIRE FIGHTING (QUINT)《消防车(五件套)》.pdf

AIR FORCE A-A-59727 VALID NOTICE 1-2012 Truck Lift Fork Diesel-Engine-Driven Pneumatic-Tired 20 000 Pound Capacity at 24 Inch Load Center《柴油机驱动铲车 充气轮胎 24 In.载荷中心容量为20 000 lb.》.pdf

AIR FORCE A-A-59727-2002 TRUCK LIFT FORK DIESEL-ENGINE-DRIVEN PNEUMATIC-TIRED 20 000 POUND CAPACITY AT 24 INCH LOAD CENTER《在24英寸的负荷中心下20000磅重容量的使用气动车轮的的柴油机驱动起重叉车》.pdf

AIR FORCE A-A-59732 C VALID NOTICE 1-2012 Scale Vehicle Platform.pdf

AIR FORCE A-A-59751 A VALID NOTICE 1-2012 Analyzer Spectrum 2.9 GHZ RF with Internal Tracking Generator《2.9 GHZ RF内置跟踪发生器的频谱分析仪》.pdf

AIR FORCE A-A-59753 VALID NOTICE 1-2012 Generator Function (0.1 HZ to 4 MHZ)《函数发生器(0.1 HZ-4 MHZ)》.pdf

AIR FORCE A-A-59753-2004 GENERATOR FUNCTION (0.1 HZ TO 4 MHZ)《功能产生器(0.1 赫至4兆赫)》.pdf

AIR FORCE A-A-59754 VALID NOTICE 1-2012 Generator Signal (10 MHZ to 20 GHZ)《信号发生器(10 MHZ-20 GHZ)》.pdf

AIR FORCE A-A-59754-2004 GENERATOR SIGNAL (10 MHZ TO 20 GHZ)《信号产生器(10兆 赫至20吉赫)》.pdf