CSN 21 0388-1984 Forming machines Single-action crank presses with operating force above 5000 kn Testing methods《不小于50O0 kN操作力曲柄压力机测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D3415-1998(2011) Standard Practice for Identificaiton of Waterborne Oils《水生油鉴别的标准操作规程》.pdf

ASTM D3415-1998(2017) Standard Practice for Identification of Waterborne Oils《水性油鉴定的标准实施规程》.pdf

ASTM D3418-2003 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry《用差示扫描量热法测定聚合物转变温度的标准试.pdf

ASTM D3418-2008 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry《用差示扫描量热法测定聚合物转变温度的标准试.pdf

ASTM D3418-2012 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry《用差示扫描量热法测定聚合物转变温度和熔化焓.pdf

ASTM D3418-2012e1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry《用差示扫描量热法测定聚合物转变温度和熔.pdf

ASTM D3418-2015 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry《采用差示扫描量热法的聚合物融化及结晶转变温.pdf

ASTM D3419-2000(2006) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds《热固性化合物在线挤压模注试样的标准操作规程》.pdf

ASTM D3419-2012 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds《热固性化合物在线挤压模注试样的标准实施规程》.pdf