CSN 22 2254-1967 Shell type face angle milling cutters for guide prisms《壳形研磨导板棱镜面角铣刀》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ-Z 9028-1987 识别卡——金融交易卡.pdf

SJ-Z 9046-1987 信息处理——直径266mm和365mm,每道107500位磁通翻转的数据存储用磁盘盘片.pdf

SJ-Z 9047-1987 信息处理——信息交换用以字符串形式表示数值的方法.pdf

SJ-Z 9048-1987 信息处理—12.7mm宽的磁带带盘—规格为16.18和22.pdf

SJ-Z 9049-1987 信息处理——12.7mm宽的磁带自动装带夹.pdf

SJ-Z 9050-1987 听写设备——基本操作要求.pdf

SJ-Z 9051-1987 信息处理用办公机器和打印机使用的卷轴式编织打印色带宽度.pdf

SJ-Z 9052-1987 打印色带—包装物上的最少标记.pdf

SJ-Z 9053-1987 信息处理用办公机器和打印机—一次性使用的纸或塑料打印色带的宽度和色带终点指示标记.pdf