CSN 22 2504-1973 Gear cutting tools Straight toothed rack-shaped involute gear cutters Basic rules《渐开线齿轮用直牙架状铣刀 基本规程》.pdf

相关资源

CSN 22 2540-1973 Straight toothed rack shaped cutters for involute gearing Pressure angle alpha = 20 degrees《渐开线齿轮用直牙架状铣刀 20压力角》.pdf

猜你喜欢

BS EN 302-3-2017 Adhesives for load-bearing timber structures Test methods Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the tran.pdf

BS EN 302-4-2013 Adhesives for load-bearing timber structures Test methods Determination of the effects of wood shrinkage on the shear strength《承重木结构用胶粘剂 试验方法 木材收缩对剪切强度影响的测定》.pdf

BS EN 302-5-2013 Adhesives for load-bearing structures Determination of maximum assembly time under referenced conditions《承重结构用粘合剂 基准条件下最大组合时间的测定》.pdf

BS EN 302-6-2013 Adhesives for load-bearing timber structures Test methods Determination of the minimum pressing time under referenced conditions《承重木结构用胶粘剂 试验方法 标准条件下最小加压时间的测定》.pdf

BS EN 302-7-2013 Adhesives for load-bearing timber structures Test methods Determination of the working life under referenced conditions《承重木结构用胶粘剂 试验方法 标准条件下使用寿命的测定》.pdf

BS EN 302-8-2017 Adhesives for load-bearing timber structures Test methods Static load test of multiple bond line specimens in compression shear《承重木结构用粘合剂 试验方法 多胶层试样在压剪下的静载荷试验》.pdf

BS EN 3020-2008 Aerospace series - Self-locking plate nuts floating two-lug in heat resisting steel FE-PA92HT (A286) silver plated - Classification 1100 MPa (at ambient temperature.pdf

BS EN 3026-1994 Test method for dry film lubricants - Corrosion test on steel specimens《干膜润滑剂 钢试样的腐蚀试验》.pdf

BS EN 3027-1994 Test method for dry film lubricants - Salt spray test《干膜润滑剂的试验方法 盐雾试验》.pdf