CSN 22 4611-1955 Grinding wheels Stepped grinding wheels《磨料机镶嵌》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E925-2009 2500 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm《光谱狭缝宽度不超过2nm的紫外线-可见光分光.pdf

ASTM E925-2009(2014) 8272 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm《光谱缝宽不超过2 nm的可见紫外线.pdf

ASTM E927-2005 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing《大地光电试验用太阳模拟的标准规范》.pdf

ASTM E927-2010 3750 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing《大地光电测试用阳光模拟的标准规范》.pdf

ASTM E927-2010(2015) 3893 Standard Specification for Solar Simulation for Photovoltaic Testing《大地光电测试用阳光模拟的标准规范》.pdf

ASTM E928-2003 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry《用差示扫描量热法测定纯度的标准试验方法》.pdf

ASTM E928-2008 346 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry《用差分扫描量热法测定克分子杂质百分率的标准试验方法》.pdf

ASTM E928-2008(2014) 1380 Standard Test Method for Purity by Differential Scanning Calorimetry《用差示扫描量热法测定纯度的标准试验方法》.pdf

ASTM E929-1983(2005) Standard Test Method for Measuring Electrical Energy Requirements of Processing Equipment《测量加工设备电能需求的试验方法》.pdf