CSN 22 8309-1970 Dies for spindle presses Design rules《枢轴上压机用冲模 设计指导》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2494-2005(2011) Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment《测定复印机和类似的办公成像设备能量消耗的标准试验方法》.pdf

ASTM F2495-2005 Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment《有复印能力的MFDs和类似的办公成像设备的能量消耗测定的标准试验方法》.pdf

ASTM F2495-2005(2011) Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment《测定有复印能力的多功能显示器和类似的办公成像设备能量消耗的标准试验.pdf

ASTM F2496-2005 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings《测定印刷品和覆层的划痕硬度和擦痕粘性的标准实施规程》.pdf

ASTM F2496-2005(2011)e1 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings《测定印刷品和覆层的划痕硬度和擦痕粘性的标准操作规程》.pdf

ASTM F2497-2005 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester《用苏瑟兰德(Sutherland)磨损试验仪测定喷墨介质耐磨耗和耐磨损性的标准实施规程》.pdf

ASTM F2497-2005(2011)e1 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester《用油墨耐擦性试验机测定喷墨介质附着力和耐划痕性的规程》.pdf

ASTM F2498-2005 Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method《用烟熏法测定喷墨介质和墨水的干燥时间的标准实施规程》.pdf

ASTM F2498-2005(2011) Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method《运用污迹法测定喷墨介质和墨水干燥时间的标准操作规程》.pdf