CSN 24 3236-1973 Ribbed angle plates with holes in both arms《双臂带孔有楞纹角板》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 1622-1993 锅炉胀接管孔尺寸和管端伸出长度.pdf

JB T 1623-1992 锅炉管孔中心距尺寸偏差.pdf

JB T 1625-2002 工业锅炉焊接管孔.pdf

JB T 1626-2002 工业锅炉产品型号编制方法.pdf

JB T 1644-2005 铸造机械 通用技术条件.pdf

JB T 1647-1999 闭式单、双点压力机 型式与基本参数.pdf

JB T 1647.1-2012 闭式压力机 第1部分：型式与基本参数.pdf

JB T 1647.2-2012 闭式压力机 第2部分：技术条件.pdf

JB T 1648-1999 湿式多片电磁离合器.pdf