CSN 25 3284-1960 Disk reference gauges for diameters from 18 up to 80 mm《直径18到80 mm的蝶形校准量规》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7309-2007 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry《用微燃烧量热仪测定塑料和其他固体材料的易.pdf

ASTM D7309-2007a 431 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry《用微燃烧量热仪测定塑料和其他固.pdf

ASTM D7309-2011 3125 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry《用微量燃烧热量法测定塑料和其他.pdf

ASTM D7309-2013 red 6710 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry《用微型燃烧量热法测定塑.pdf

ASTM D7310-2007 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors《用光学传感器进行塑料薄膜缺陷检测和评定等级用标准指南》.pdf

ASTM D7310-2011 0625 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors《用光学传感器进行塑料薄膜缺陷检测和评定等级用标准指南》.pdf

ASTM D7311-2007 781 Standard Specification for Liquid-Applied Single-Pack Moisture-Triggered Aliphatic Polyurethane Roofing Membrane《液体用单包装湿气引起的硬化脂肪族聚氨酯屋顶薄膜的标准规范》.pdf

ASTM D7312-2007 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)《采用超级铺面剪切试验器(SST.pdf

ASTM D7312-2010 1875 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)《采用超级铺面剪切试验.pdf