CSN 25 4048-1985 Setting plug for NOT GO screw calliper gauge Metric thread of diameter over 3 mm up to 100 mm《非穿过型螺丝两脚规定位插塞 直径为3mm到100 mm的公制螺纹》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 19262-2015 Photography Archiving Systems Vocabulary《摄影 存档系统 词汇》.pdf

BS ISO 19272-2015 Low alloyed steel Determination of C Si Mn P S Cr Ni Al Ti and Cu Glow discharge optical emission spectrometry (routine method)《低合金钢 C Si Mn P S Cr Ni Al Ti以及Cu含量.pdf

BS ISO 1928-2009 Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value《固体矿物燃料 弹式量热计测定总热值并计算净热值》.pdf

BS ISO 19280-2017 Corrosion of metals and alloys Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution《金属和合金的腐蚀 氯化铁溶液中圆柱形缝隙几何形状.pdf

BS ISO 19281-2016 Air cargo Fire resistant containers Design performance and testing requirements《航空货物 防火容器 设计 性能和试验要求》.pdf

BS ISO 19289-2015 Air quality Meteorology Siting classifications for surface observing stations on land《空气质量 气象学 陆上表面观察站的选址类别》.pdf

BS ISO 19290-2016 Cigarettes Determination of tobacco specific nitrosamines in mainstream cigarette smoke Method using LC-MS MS《卷烟 卷烟主流烟气中烟草特有亚硝胺的测定 LC-MS MS法》.pdf

BS ISO 19291-2016 Lubricants Determination of tribological quantities for oils and greases Tribological test in the translatory oscillation apparatus《润滑剂 测定润滑油和润滑脂的摩擦量 平移式摆动装置的摩擦试验.pdf

BS ISO 19292-2014 Ships and marine technology Lifesaving and fire protection Point-type resettable flame detectors for ships《船舶和海洋技术 救生和消防设备 船舶用点式可重调的火焰检测器》.pdf