CSN 25 4066-1986 Screw gauges Minimum and maximum check plug for solid NOT GO screw ring gauge Cylindrical pipe thread diameter G 1 8 - G 3 1 2《螺纹规 非穿过型实心环首螺钉规最小与最大检测插栓 直径为1 8 - G .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HG T 21504.1-1992（条文说明） VN0.5m ～VN100m 玻璃钢储槽标准系列.pdf

HG T 21504.2-1992 拼装式玻璃钢储罐标准系列（VN100m3～VN500m3）.pdf

HG T 21504.2-1992（条文说明） VN100m ～VN500m 拼装式玻璃钢储罐标准系列.pdf

HG T 21507-1992 化工企业电力设计施工图内容深度统一规定.pdf

HG T 21508-1992 爆炸危险环境的配线和电气设备安装通用图.pdf

HG T 21509-1995 化工企业电缆隧道敷设通用图.pdf

HG T 21511-2011 橡胶工厂施工图设计文件内容和深度规定.pdf

HG T 21512-1995（编制说明） 梁型气体喷射式填料支承板.pdf

HG T 21514-2014 钢制人孔和手孔的类型与技术条件.pdf