CSN 25 4111-1954 Thread gauges Go-side screw plug gauges diameter over 30 up to 100 mm Metric thread《螺纹螺纹辊口径米，超过 30至100毫米 公制螺纹》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 6276.4-1986 工业用碳酸氢铵 硫酸盐含量的测定 目视比浊法.pdf

GB T 67-2000 开槽盘头螺钉.pdf

GB T 70.1-2000 内六角圆柱头螺钉.pdf

GB T 70.2-2000 内六角平圆头螺钉.pdf

GB T 70.3-2000 内六角沉头螺钉.pdf

GB T 7060-1994 船用旋转电机基本技术要求.pdf

GB T 7061-1986 船用低压开关设备和控制设备装置通用技术条件.pdf

GB T 7064-1996 透平型同步电机技术要求.pdf

GB T 7064-2002 透平型同步电机技术要求.pdf