CSN 30 5100-1982 Control and measuring devices for automotive vehicles General technical requirements Test methods《自动机车的控制机测量装置及其技术要求测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ 3004.1-1988 组合冲模 异形刃口.pdf

SJ 3004.10-1988 组合冲模 异形刃口.pdf

SJ 3004.11-1988 组合冲模 异形刃口.pdf

SJ 3004.12-1988 组合冲模 异形刃口.pdf

SJ 3004.13-1988 组合冲模 异形刃口.pdf

SJ 3004.15-1988 组合冲模 凹模.pdf

SJ 3004.2-1988 组合冲模 异形刃口.pdf

SJ 3004.3-1988 组合冲模 异形刃口.pdf

SJ 3004.4-1988 组合冲模 异形刃口.pdf