CSN 42 0282-1972 Cutting of steel plates Oxygen cutting《热轧钢板切割 氧气切割》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D3525-2004(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography《使用气相色谱法测定使用的汽油机油中汽油稀释剂的标准试验方法》.pdf

ASTM D3527-2007 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease《汽车轮轴轴承润滑脂的寿命性能用标准试验方法》.pdf

ASTM D3527-2007e1 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease《汽车轮轴承润滑脂寿命性能的标准试验方法》.pdf

ASTM D3527-2011 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease《车轮轴承润滑脂寿命性能的标准试验方法》.pdf

ASTM D3527-2015 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease《机动车轮轴承润滑脂寿命性能的标准试验方法》.pdf

ASTM D3527-2018 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease.pdf

ASTM D3528-1996(2002) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading《用拉力负荷法测定双搭接剪切粘结接头的强度特性的试验方法》.pdf

ASTM D3528-1996(2008) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading《用拉力负荷法测定双搭接剪切粘结接头的强度特性的标准试验方法》.pdf

ASTM D3528-1996(2016) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading《采用拉向载荷测定双搭接剪切粘接接头强度特性的标准试验方法》.pdf