CSN 42 0601-1982 High purity metals General requirements to methods of analysis《高纯度金属 分析方法的一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4776 D4776M-2018 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure《用H试验程序测定轮胎帘线和其他增强帘线与橡胶混合物粘合性的标准试验方法》.pdf

ASTM D4776-2004 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure《用H-试验法测试轮胎帘布及其他增强软线与橡胶化合物粘着性的标准试验方法》.pdf

ASTM D4776-2004e1 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure.pdf

ASTM D4778-2005 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《在传热条件下测定冷却水的腐蚀和污染倾向的标准试验方法》.pdf

ASTM D4778-2010 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《在热转换条件下测定冷却水的腐蚀和污染倾向的标准试验方法》.pdf

ASTM D4778-2015 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《测定传热条件下冷却水腐蚀和结垢性的标准试验方法》.pdf

ASTM D4780-1995(2007) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂的低表面面积的标准试验方法》.pdf

ASTM D4780-2012 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂及催化剂载体的低表面面积的标准试验方法》.pdf

ASTM D4780-2012(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂的低表面面积的试验方法》.pdf