CSN 42 0895 Cast 7-1988 Testing of granulated aluminium powder powder and paste Determination of liquid fractions content《雾化铝粉，铝粉和铝浆的测试，液体含量的测定 雾化铝粉，铝粉和铝浆的测试 液体含量的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 5089.2-2010 内燃机.纸质滤芯机油滤清器.第2部分 滤芯.技术条件.pdf

JB T 5089.3-2010 内燃机.纸质滤芯机油滤清器.第3部分 试验方法.pdf

JB T 5100-1991 熔模铸造碳钢件.技术条件.pdf

JB T 5101-1991 气割机用割炬.pdf

JB T 5105-1991 铸件模样.起模斜度.pdf

JB T 5106-1991 铸件模样型芯头.基本尺寸(报批稿).pdf

JB T 5108-1991 铸造黄铜.金相.pdf

JB T 5110.1-1991 螺旋压力机锻模.圆形模块结构与尺寸.pdf

JB T 5110.1-2015 螺旋压力机锻模 零件 第1部分 技术条件.pdf