CSN 42 5392-1989 Hot-rolled steel plates with oval ribs《10级和11级钢质热轧撕裂轮毂板》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 11737-2-2009 Sterilization of medical devices - Microbiological methods - Tests of sterility performed in the definition validation and maintenance of a sterilization pro.pdf

BS EN ISO 11746-2012 Rice Determination of biometric characteristics of kernels《稻米 谷物生物计量规格参数表的测定》.pdf

BS EN ISO 11747-2012 Rice Determination of rice kernel resistance to extrusion after cooking《米 烹饪后稻米籽粒耐挤制测定》.pdf

BS EN ISO 11771-2010 Air quality Determination of time-averaged mass emissions and emission factors General approach《空气质量 按时间平均的质量排放量和排放因子的测定 一般方法》.pdf

BS EN ISO 11782-1-1998 Corrosion of metals and alloys - Corrosion fatigue testing - Cycles to failure testing《金属和合金的腐蚀 腐蚀疲劳测试 失效测试周期》.pdf

BS EN ISO 11782-2-1998 Corrosion of metals and alloys - Corrosion fatigue testing - Crack propagation testing using precracked specimens《金属和合金的腐蚀 腐蚀疲劳测试 使用预开裂样品的裂纹扩展测试》.pdf

BS EN ISO 11806-1-2011 Agricultural and forestry machinery Safety requirements and testing for portable hand-held powered brush-cutters and grass-trimmers Machines fitted with an i.pdf

BS EN ISO 11806-2-2011 Agricultural and forestry machinery Safety requirements and testing for portable hand-held powered brush-cutters and grass-trimmers Machines for use with bac.pdf

BS EN ISO 11807-1-2005 Integrated optics - Vocabulary - Basic terms and symbols《集成光学 词汇 基本术语和符号》.pdf