CSN 49 1012 Za-1987 《修订a- 7-8 1987捷克国家标准49 1012 木材工艺 技术要求》.pdf

相关资源

CB T 3668-1995 电刷镀镍、铜工艺技术要求.pdf

CB T 3711-1995 船用柴油机零件焊补修复工艺技术要求.pdf

CB T 3731-1995 船用柴油机零件镀铬修复工艺技术要求.pdf

CB T 3367-1992 成品油船货油舱涂装工艺技术要求.pdf

JB T 5750-1991 气象仪器防盐雾、防潮湿、防霉菌工艺技术要求.pdf

JB T 5750-2014 气象仪器防盐雾、防潮湿、防霉菌 工艺技术要求.pdf

QJ 3013-1998 红外光学产品粘接密封工艺技术要求.pdf

QJ 3014-1998 航天电子电气产品聚硫橡胶灌封工艺技术要求.pdf

QJ 3015-1998 印制电路板图形转移工艺技术要求.pdf

SY T 6464-2000 水平井完井工艺技术要求.pdf

猜你喜欢

BS EN 12705-2011 Adhesives for leather and footwear materials Determination of colour change of white or bright coloured leather surfaces by migration《皮革和鞋靴材料粘合剂 用迁移法对白色或鲜艳色皮革表面颜色变.pdf

BS EN 12706-2000 Adhesives - Test methods for hydraulic setting floor smoothing and or levelling compounds - Determinatiion of flow characteristics《胶粘剂 使地板平滑和 或平整的液态化合物试验方法 流动特性测定》.pdf

BS EN 12707-2009 Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l《塑料桶 额定容量为210 L至225 L的非活动盖(密封口)桶》.pdf

BS EN 12709-2000 Plastic drums Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l《塑料圆桶 额定容量为20 L至120 L圆形截面的固定桶盖(密封盖)的圆桶》.pdf

BS EN 12710-2006 Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l《纤维板鼓型桶 公称容量15l-250l带卡圈的活动头（开口）纸筒》.pdf

BS EN 12712-2000 Plastics jerricans Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm 1000 mm x 1200 mm and 1140 mm x 1140 .pdf

BS EN 12713-2000 Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L《标称容量为20升至60升的塑料容器的螺纹帽封闭系统》.pdf

BS EN 12714-2009 Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L《塑料桶 额定容量为25 L至60 L的活动盖(开口)桶》.pdf

BS EN 12715-2000 Execution of special geotechnical work Grouting《特殊土工工程的施工 水泥浆》.pdf