CSN 70 0626 Cast 1-1976 Glass testing Chemical analysis of glass Determination of iron(III)-oxide Photometric method with 2 2-bipyridine《玻璃的化学分析 测定三氧化铁2，2 连嘧啶光度法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 12FTM05-2012 Combined Effects of Gravity Bending Moment Bearing Clearance and Input Torque on Wind Turbine Planetary Gear Load Sharing.pdf

AGMA 12FTM06-2012 Virtual Optimization of Epicyclic Gearbox Planet Bearings in Wind Turbines.pdf

AGMA 12FTM07-2012 Validation of a Model of the NREL Gearbox Reliability Collaborative Wind Turbine Gearbox.pdf

AGMA 12FTM08-2012 Combined Marine Propulsion Systems Optimization and Validation by Simulation.pdf

AGMA 12FTM09-2012 Systematic Approach for the Psychoacoustic Analysis of Dynamic Gear Noise Excitation.pdf

AGMA 12FTM10-2012 Development of Novel CBN Grade for Electroplated Finish Grinding of Hardened Steel Gears.pdf

AGMA 12FTM11-2012 Contemporary Gear Pre-Machining Solutions.pdf

AGMA 12FTM12-2012 Manufacturing Method of Pinion Member of Large-Sized Skew Bevel Gears Using Multi-Axis Control and Multi-Tasking Machine Tool.pdf

AGMA 12FTM13-2012 Gear Material Selection and Construction for Large Gears.pdf