CSN 72 1090-1981 Determination of abrasivity of floated kaolin according to Einlehner《根据Einlehner法测定浮高岭土的腐蚀性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 22007-4-2017 Plastics Determination of thermal conductivity and thermal diffusivity Laser flash method《塑料 导热性和热散性 激光闪光法》.pdf

BS EN ISO 22030-2011 Soil quality Biological methods Chronic toxicity in higher plants《土质 生物方法 高等植物的慢性毒性》.pdf

BS EN ISO 22032-2009 Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography mass sp.pdf

BS EN ISO 22088-1-2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - General guidance《塑料 测定耐环境应力破裂性(ESC) 通用指南》.pdf

BS EN ISO 22088-2-2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Constant tensile load method《塑料 测定耐环境应力破裂性(ESC) 恒定拉伸负荷法》.pdf

BS EN ISO 22088-3-2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method《塑料 测定耐环境应力破裂性 弯曲带法》.pdf

BS EN ISO 22088-4-2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Ball or pin impression method《塑料 测定耐环境应力破裂性 弯曲带法》.pdf

BS EN ISO 22088-5-2009 Plastics - Determination of resistance to environmental stress cracking (ESC) - Constant tensile deformation method《塑料 耐环境应力开裂(ESC) 恒定拉伸变形方法》.pdf

BS EN ISO 22088-6-2009 Plastics — nDetermination nof resistance to nenvironmental stress ncracking (ESC) nPart 6 Slow strain rate method (ISO n22088-6 2006)《塑料 耐环境应力开裂(ESC)的测定 第6部分.pdf