CSN ISO 5041-1994 Continuous mechanical handling equipment for unit loads Crate - carrying chain conveyors having biplanar chains for flat - bottomed unit loads Safety code《单位负载用连续.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASD-STAN PREN 3271-1994 Aerospace Series Pipe Coupling 8 Degree 30' Thrust Wire (Edition P 2 )《航空航天系列 带止推金属丝的钛合金制8°30'管接头 第P2版［替代为 ASD-STAN PREN 4032］》.pdf

ASD-STAN PREN 3272-1989 Aerospace Series Pipe Coupling 8 Degrees 30' Dynamic Beam Seal End for Nipple Welded Geometric Configuration (Issue P 1)《航空航天系列 8°30'管接头 焊接喷嘴用动态横梁式密封端 几何形状 .pdf

ASD-STAN PREN 3273-1989 Aerospace Series Pipe Coupling 8 Degress 30' Dynamic Beam Seal End for Elbows Tees and Crosses Geometric Configuration (Issue P 1)《航空航天系列 8°30'管接头 弯头、T型接头和十.pdf

ASD-STAN PREN 3274-2010 Aerospace series Pipe coupling 8 Degrees 30' Thread end Geometric configuration (Edition P 2)《航空航天系列 8°30'管接头 螺纹端 几何形状 第P2版》.pdf

ASD-STAN PREN 3275-2018 Aerospace series - Pipe coupling 8 ' up to 28 000 kPa Dynamic beam seal - Metric series - Technical specification (Edition P 2).pdf

ASD-STAN PREN 3276-1988 Aerospace Series Clamps Loop ( P Type) without Rubber Cushioning in Corrosion Resisting Steel Dimensions - Masses (Edition 1)《航空航天系列 耐蚀钢制不带橡胶垫的环状夹具(“P”型) 尺.pdf

ASD-STAN PREN 3278-1988 Aerospace Series Sleeves Tubular Protruding Head in Corrosion Resisting Steel Passivated (0 25 mm Wall Thickness) (Issue P 1)《航空航天系列 钝化耐蚀钢(壁厚度0 25mm)制的突头管状套.pdf

ASD-STAN PREN 3278-2018 ENGLISH VERSION Aerospace series - Sleeves tubular protruding head in corrosion resisting steel passivated (0 25 mm wall thickness) (Edition P 2).pdf

ASD-STAN PREN 3280-2010 Aerospace series Bearings airframe rolling rigid or self-aligning Technical specification (Edition P 2)《航空航天系列 机体用刚性或自调位滚动轴承 技术规范 第P2版》.pdf