CSN ISO 6130-1992 Chromium ores - Determination of total iron content - Titrimetric method after reduction《铬矿石 铁总含量测定 还原后滴定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI IEEE 262B-1977 Trial-Use Standard Dielectric Test Requirements for Power Transformers for Operation on Effectively Grounded Systems 345 kV and Above.pdf

ANSI IEEE 269-2010 Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets Handsets and Headsets《模拟和数字电话机 手机和听筒传输性能测量的标准方法》.pdf

ANSI IEEE 269A-2012 Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets Handsets and Headsets Amendment 1.pdf

ANSI IEEE 270-2006 Definitions for Selected Quantities Units and Related Terms with Special Attention to the International System of Units (SI)《特别关注国际单位制(SI)用量、单位和相关术语的标准定义》.pdf

ANSI IEEE 280-1985 Standard Letter Symbols for Quantities Used in Electrical Science and Electrical Engineering《电工学和电气工程中使用的量值的字母符号》.pdf

ANSI IEEE 286-2000 Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation《电动机械定子线圈绝缘的损失角增量测量的推荐实施规程》.pdf

ANSI IEEE 292-1969 Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros《单自由度抑跳速率陀螺的规范格式》.pdf

ANSI IEEE 293-1969 Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate Gyros《单自由度抑跳速率陀螺的试验程序》.pdf

ANSI IEEE 299-2006 Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures《测量电磁屏蔽网罩效能的标准方法》.pdf