CSN ISO 7009-1994 Woodworking machines Single spindle moulding machines Nomenclature and acceptance conditions《木工机床 单轴制模机术语与验收条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 1722-2-2006 Fences Part 2 Specification for strained wire and wire mesh netting fences《栅栏 应变金属丝和金属丝网栅栏用规范》.pdf

BS 1722-4-1986 Fences - Specification for cleft chestnut pale fences《栅栏 第4部分 劈开的栗木板条栅栏规范》.pdf

BS 1722-5-2006 Fences Part 5 Specification for close-boarded fences and wooden palisade fences《栏栅 第5部分 鱼鳞板围栏和木质栅栏围篱的规范》.pdf

BS 1722-7-2006 Fences - Specification for wooden post and rail fences《栏栅 木柱和栏栅用规范》.pdf

BS 1722-8-2006 Fences - Specification for mild steel (low carbon steel) continuous bar fences and hurdles《栅栏 低碳钢链条链接栅栏和篱笆用规范》.pdf

BS 1722-9-2006 Fences - Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals《栅栏 带圆形或方形竖杆和扁平横杆的低碳钢栅栏用规范》.pdf

BS 1726-1-2010 Cylindrical helical springs made from round wire and bar Guide to methods of specifying and tolerancing hot coiled springs and cold coiled springs not covered by BS .pdf

BS 1726-2-2002 Cylindrical helical springs made from round wire and bar - Guide to methods of specifying tolerances and testing - Extension springs《用圆形线材和棒材制的圆柱形螺旋弹簧 规格、公差和测试指南 拉伸弹.pdf

BS 1726-3-2002 Cylindrical helical springs made from round wire and bar - Guide to methods of specifying tolerances and testing - Torsion springs《用圆形线材和棒材制的圆柱形螺旋弹簧 规格、公差和测试指南 扭力弹簧》.pdf