CSN ISO 7884-4-1994 Glass - Viscosity and viscometric fixed points - Part 4 Determination of viscosity by beam bending《玻璃 粘度和粘度固定点 第4部分：梁弯曲粘度测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 10218-1-2012 Steel wire and wire products General Test methods《钢丝和线材制品 概述 试验方法》.pdf

BS EN 10218-2-2012 Steel wire and wire products General Wire dimensions and tolerances《钢丝和丝材制品 导则 丝材尺寸和公差》.pdf

BS EN 10219-1-2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements《非合金和细晶结构钢的冷成形焊接结构空心型材 交货技术要求》.pdf

BS EN 10219-2-2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Tolerances dimensions and sectional properties《非合金和细晶结构钢的冷成形焊接结构空心型材 公差、尺寸和局部特.pdf

BS EN 10220-2002 Seamless and welded steel tubes - Dimensions and masses per unit length《无缝和焊接钢管 尺寸和每单位长度的质量》.pdf

BS EN 10221-1996 Specification for surface quality classes for hot-rolled bars and rods - Technical delivery conditions《热轧棒材和短棒材的表面质量规范 交付技术状态》.pdf

BS EN 10222-1-2017 Steel forgings for pressure purposes General requirements for open die forgings《承压用的钢锻件 敞口铸模锻件的一般要求》.pdf

BS EN 10222-2-2017 Steel forgings for pressure purposes Ferritic and martensitic steels with specified elevated temperatures properties《压力容器用钢锻件 具有规定升温特性的铁素体钢和马口铁钢》.pdf

BS EN 10222-3-2017 Steel forgings for pressure purposes Nickel steels with specified low temperature properties《压力容器用钢锻件 具有特定低温特性的镍钢》.pdf