CSN ON 13 0650-1965 《架子垫》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 5667-3-1979 Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials storage equipment fed by a pneumatic handling system《连续式机械装卸设.pdf

BS 5667-5-1979 Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials couplings and hose components used in pneumatic handling《连续式机.pdf

BS 5668-1-2000 Routine analytical cigarette smoking machine - Definitions and standard conditions《常规分析卷烟发烟器 定义与标准条件》.pdf

BS 567-1973 Specification for asbestos-cement flue pipes and fittings light quality《轻型石棉水泥烟道管及配件规范》.pdf

BS 5671-1979 Guide for commissioning operation and maintenance of hydraulic turbines《水轮机交付使用、操作与维修指南》.pdf

BS 5672-1991 Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in-line engines and.pdf

BS 5677-1979 Method (precision) for pressure calibration of one-inch standard condenser microphones by the reciprocity technique《采用互易技术对1英寸标准电容式传声器进行压力校准的精确方法》.pdf

BS 5682-2015 Dimensions of probes and terminal units for medical gas supply systems Requirements《医疗供气系统用探测器和终端装置尺寸 要求》.pdf

BS 5686-1986 Specification for straight-sided splines for cylindrical shafts metric nominal dimensions tolerances and gauging requirements《圆柱轴直边花键规范 米制公称尺寸、公差和测量要求》.pdf