CSN ON 13 2481-1964 《橡胶焊接弯头R =Js 法兰Jt16》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 06FTM10-2006 Fabrication Assembly and Test of a High Ratio Ultra Safe High Contact Ratio Double Helical Planetary Transmission for Helicopter Applications《直升机设施用双螺旋混合行星齿轮传动高接触.pdf

AGMA 06FTM11-2006 On Tooth Failure Analysis in Small--Teeth--Number Gearing An Analytical Approach《小齿数齿轮上轮齿故障分析 分析方法》.pdf

AGMA 06FTM12-2006 A Crane Gear Failure Analysis -- Case Study Observations Lessons Learned Recommendations《起重机齿轮疲劳分析.案例研究、观察、课程学习、介绍》.pdf

AGMA 06FTM13-2006 Economic Aspects of Vacuum Carburizing《真空渗碳处理的经济性》.pdf

AGMA 06FTM14-2006 The Optimal High Speed Cutting of Bevel Gears -- New Tools and New Cutting Parameters《锥齿轮的最佳高速切割.新工具和新切割参数》.pdf

AGMA 06FTM15-2006 Optimal Tooth Modifications in Spiral Bevel Gears Introduced by Machine Tool Setting Variation《由机械工具设置变量产生的螺旋伞齿轮轮齿的最佳修形》.pdf

AGMA 06FTM16-2006 Certificate for Involute Gear Evaluation Software《渐开线齿轮评估软件的证书》.pdf

AGMA 07FTM01-2007 Estimation of Lifetime for Plastic Gears《塑料齿轮寿命的评估》.pdf

AGMA 07FTM02-2007 Study of the Correlation Between Theoretical and Actual Gear Fatigue Test Data on a Polyamide《关于聚酰胺理伦和实际齿轮疲劳试验数据之间相互关系的研究》.pdf