CSN ON 13 4275-1963 《吸入阀和灰口铸铁Jt10》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5335-2014 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges《用粘结的电阻应变仪测定岩石热膨胀线性系数的标准试验方法》.pdf

ASTM D5336-2003 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials《聚邻苯二酰胺(PPA)注射模塑材料的标准规范》.pdf

ASTM D5336-2009 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials《聚邻苯二酰胺(PPA)喷射模铸材料的标准规范》.pdf

ASTM D5336-2015 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials《聚邻苯二甲酰胺 (PPA) 喷射模铸材料规格的标准分类系统和基础》.pdf

ASTM D5336-2015a Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material《苯丙醇胺 (PPA) 注塑成型材料规格的标准分类系统和基础》.pdf

ASTM D5337-2004 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps《小型取样泵校正用流率的标准规程》.pdf

ASTM D5337-2011 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps《个人采样泵校正流量的标准操作规程》.pdf

ASTM D5337-2011(2016) Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps《个人取样泵流量调节的标准实施规程》.pdf

ASTM D5338-1998(2003) Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions《在受控合成条件下测定塑料材料需氧的生物降解的标准试验方法》.pdf