CSN ON 23 6440-1964 《拉紧器 规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI UL 539-2017 UL Standard for Safety Single and Multiple Station Heat Alarms (Seventh Edition Reprint with revisions through and including May 22 2018).pdf

ANSI UL 541-2016 UL Standard for Safety Refrigerated Vending Machines (Ninth Edition Reprint with Revisions Through and Including May 23 2016)《可制冷的自动售货机》.pdf

ANSI UL 542-2005 UL Standard for Safety Fluorescent Lamp Starters (Ninth Edition Reprint with Revisions Through and Including October 30 2014)《荧光灯用起动器的安全标准》.pdf

ANSI UL 551-2009 UL Standard for Safety Transformer-Type Arc-Welding Machines (Eighth Edition Reprint with revisions through and including January 8 2018)《变压器型弧焊机安全性标准》.pdf

ANSI UL 555S-2014 UL Standard for Safety Smoke Dampers (Fifth Edition Reprint with revisions through and including October 27 2016).pdf

ANSI UL 558-2012 UL Standard for Safety Industrial Trucks Internal Combustion Engine-Powered (Tenth Edition Reprint with revisions through and including November 20 2017)《内燃机动力驱动的工.pdf

ANSI UL 561-2011 UL Standard for Safety Floor-Finishing Machines (Seventh Edition Reprint with Revisions Through and Including January 9 2018)《地板整理机用安全性标准》.pdf

ANSI UL 563-2009 UL Standard for Safety Ice Makers (Eighth Edition Reprint with Revisions Through and Including January 12 2017)《制冰机安全标准》.pdf

ANSI UL 565-2013 UL Standard for Safety Liquid-Level Gauges for Anhydrous Ammonia and LP-Gas (Sixth Edition Reprint with revisions through and including February 23 2018)《无水液氨和液化石油.pdf