CSN ON 34 6226-1967 Hard-carbon resin-bonded《硬碳树脂》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM B857-2018 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors Coated-Steel Supported (ACSS TW)《涂层钢支撑的异型导线紧密同心绞合铝导线的标准规范(ACSS TW)》.pdf

ASTM B858-2006 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys《用氨蒸气试验测定铜合金对应力腐蚀裂纹敏感度的标准试验方法》.pdf

ASTM B858-2006(2012) Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys《用氨蒸气试验测定铜合金对应力腐蚀裂纹敏感度的标准试验方法》.pdf

ASTM B858-2006(2018) Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys《铜合金应力腐蚀裂纹敏感性测定用氨蒸气试验的标准试验方法》.pdf

ASTM B859-2003 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis《粒径分析前耐熔金属粉末及其化合物去除结块的标准实施规范》.pdf

ASTM B859-2003(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis《粒径分析前耐熔金属粉末及其化合物去除结块的标准实施规程》.pdf

ASTM B859-2013 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis《粒径分析前耐熔金属粉末及其化合物去除结块的标准实施规程》.pdf

ASTM B859-2013(2018) Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis《在粒度分析之前对难熔金属粉末及其化合物进行解聚的标准实践》.pdf

ASTM B86-2006 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings《锌及锌铝(ZA)合金铸件和压铸件的标准规范》.pdf